OUTSTANDING HIGH-GRADE RESULTS FROM MAIDEN ARMIDALE DRILLING
Released
Released
Announcement PDF
ASX: RMX
investorhub.redmountainmining.com.au info@redmountainmining.com.au Red Mountain Mining Ltd ACN 119 568 106
MAIDEN DRILLING DELIVERS EXCEPTIONAL
HIGH-GRADE INTERSECTIONS AT ARMIDALE PROJECT
HIGHLIGHTS:
• Maiden drilling delivers high-grade Antimony discovery at Oaky Creek, with multiple
significant intersections demonstrating the potential of previously undrilled targets and
provides a strong foundation for follow-up exploration. Some of the best intersections include:
OC26RC003: 86m to 91m: 5m @ 5.20% Sb
▪ including 86 to 89m: 3m @ 8.40% Sb
▪ and highest result of: 1m @ 18.98% Sb
OC26RC005: 77m to 78m: 1m @ 7.22% Sb
OC26RC004: 93m to 95m: 2m @ 2.36% Sb
▪ including 93m to 94m: 1m @ 4.43% Sb
• Assays represent an exceptional outcome for Red Mountain’s maiden drilling program at
Armidale, confirming high-grade antimony mineralisation at Oaky Creek, with a peak assay of
18.98% Sb and intersections of up to 5m @ 5.20% Sb. High-grade mineralisation extends to
approximately 75m vertical depth and remains open at depth, highlighting the potential for
further discoveries through deeper drilling.
• Red Mountain’s high-grade antimony intersections at Oaky Creek show strong geological
similarities to Larvotto Resources’ (ASX: LRV Market Cap ~$400m) nearby Hillgrove Project,
where at Hillgrove structurally controlled antimony-rich veins range from millimetres to
several metres in width and within a larger antimony mineralised system.
• Red Mountain interprets that drill intersection OC26RC003 assaying up to 18.98% Sb may be
located within or close to a principal mineralising feeder structure. The interpreted northwest-
striking fault or shear zone is supported by an offset in surface mineralisation, a planned
drone magnetic survey is designed to better define this structure and guide follow-up drilling.
• The strong antimony grades and limited gold encountered in RMX’s shallow maiden drilling
are consistent with a potential upper-level antimony-rich zone, highlighting the opportunity
to test for extensions of mineralisation at depth.
• Drone magnetics survey expected to be completed by late November, will take place at the
Oaky Creek prospect, to further define potential new drill targets and for planning deeper
holes.
ASX Announcement
16 November 2026
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
2
Red Mountain Mining Limited (ASX: RMX, US OTC: RMXFF, or “the Company”), a Critical Minerals
exploration and development company with an established portfolio in Tier-1 Mining Districts in the
United States and Australia, is pleased to announce strong analytical results from the Company’s
successful maiden reverse circulation (RC) drilling program at the Oaky Creek antimony prospect, at
the Armidale Antimony-Gold Project in NSW.
Successful Maiden Drill-Program Delivers High-Grade Antimony discovery at Oaky Creek
Red Mountain’s maiden drilling program at Oaky Creek has delivered exceptional high-grade
antimony results, confirming significant mineralisation within a previously undrilled target. Multiple
high-grade intersections, including 5m @ 5.20% Sb and a peak assay of 18.98% Sb, demonstrate the
prospect’s potential, with mineralisation remaining open at depth and providing a strong foundation
for follow-up exploration.
Figure 1: Plan view of drill locations and Sb assay results received at Oaky Creek South Main Grid relative to the auger soil antimony
anomaly and mapped surface stibnite vein traces. The interpreted fault is based on the offset in surface veining and the soil anomaly. The
location of mineralised (>1% Sb) intercepts are highlighted. Holes OC26RC001 to OC25RC009 are all inclined at -55⁰.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
3
Drilling at the coherent 300m x 30m Oaky Creek South Main Grid antimony-arsenic auger soil anomaly
returned multiple high-grade antimony intersections, confirming significant mineralisation within the
central portion of the target (Table 1, Figure 1). Significant intersections include:
OC26RC003: 86m to 91m: 5m @ 5.20% Sb, including 86 to 89m: 3m @ 8.40% Sb, with a
peak 1m result of 18.98% Sb;
OC26RC005: 77m to 78m: 1m @ 7.22% Sb;
OC26RC004: 93m to 95m: 2m @ 2.36% Sb, including 93m to 94m: 1m @ 4.43% Sb; and
OC26RC002: 43m to 45m: 2m @ 1.06% Sb, including 43m to 44m: 1m @ 1.97% Sb.
Note: Reported intersections are downhole lengths only with true widths not yet known.
The successful maiden RC drilling program1
was completed over priority orogenic antimony-gold
targets defined from Red Mountain’s comprehensive surface rock chip, conventional soil and auger
soil sampling program (Figure 5).
High-grade antimony intersections at Oaky Creek demonstrate geological similarities to Larvotto
Resources’ (ASX: LRV; market capitalisation ~$400m) nearby Hillgrove Project, where structurally
controlled antimony-rich veins form part of a larger mineralised system. Strong antimony grades and
limited gold encountered in RMX’s maiden drilling are consistent with a potential upper-level
antimony-rich zone. Mineralisation extends to approximately 75m vertical depth and remains open at
depth, highlighting the potential for further discoveries through deeper drilling.
A remaining undrilled target at Oaky Creek represents a high-priority exploration opportunity, as
access restrictions prevented drilling at the time, leaving further potential for follow-up.
Sample splits were geologically logged and screened on site using a portable XRF (pXRF) to prioritise
samples for laboratory analysis. Based on the pXRF geochemistry (particularly Sb results), logging of
carbonate and/or chlorite alteration and identification of quartz veining and samples were submitted
to Intertek for four-acid digest multielement analysis and gold analysis by fire assay. Assayed intervals
and antimony, gold, silver and arsenic results for all assay samples are listed in Appendix 1.
1
RMX ASX Announcement 23 September 2026. https://investorhub.redmountainmining.com.au/announcements/lYYZ9o-drilling-completed-
at-armidale-antimony-gold-project
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
4
The mineralised intersections correlate well with the antimony auger soil anomaly and mapped
subcropping surface quartz-carbonate-stibnite vein traces and are concentrated either side of an
interpreted northwest-striking fault (Figure 1), which was not directly mapped, but is expressed at
surface by a 30m to 40m apparent dextral offset of subcropping veins and the auger soil anomaly.
The strongest mineralised intersection of 5m @ 5.20% Sb in OC26RC003 lies almost directly on the
interpreted location of the fault at surface, suggesting that this structure may be an important local
feeder structure for the antimony mineralizing fluids at Oaky Creek South Main Grid. The antimony
auger soil anomaly and subcropping veins trend at ~90⁰ to the fault in a northeastern orientation,
indicating that cross-structures may control the distribution of antimony mineralisation.
Substantial depth extent demonstrated and further potential exists
All the assayed drillholes other than hole OC26RC012 were completed with an inclination of -55⁰, so
the downhole depths of the intersections at >90m downhole in holes OC26RC003 and OC26RC004
correspond to vertical depths of ~75m below surface and remain open at depth.
Although further drilling and better structural control are needed to confirm the relationship between
mineralisation at surface and these intersections, it appears likely that the mineralisation at Oaky Creek
Main Grid persists over a significant depth extent. This is typical of orogenic antimony-gold systems
in the New England Orogen, with Larvotto Resources’ (ASX: LRV; Market Cap ~$400 million)
analogous Hillgrove deposit known to extend over vertical depths of more than 1km2
. Further drilling
is warranted at Oaky Creek South Main Grid to test for further depth extensions of mineralisation
beyond the current ~75m vertical depth extent tested.
Results for the remaining ten holes, which targeted the Oaky Creek South Workings and IP anomaly,
the Oaky Creek North Workings and an Antimony-bearing creek exposure reported assay results
<500ppm Sb (Appendix 1). As can be seen on Figure 5, access restrictions meant that most the holes
testing these targets were collared at some distance from the mapped veins and the limitations of
the rig, which could not drill beyond 120m, meant that it was often not possible to reach the desired
target areas. Consequently, none of these targets has been fully tested by the current drilling program
and further drilling, with a more capable rig, is warranted.
2
B. Hooper, P. Ashley and P. Shields, 2006. https://smedg.org.au/wp-content/uploads/2015/05/Hoopab.pdf
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
5
Clear relationship between antimony, gold and arsenic
As can be seen in Appendix 1, gold assay results for the drilling were subdued, with a maximum value
of only 0.217ppm Au and all other results falling below 0.1ppm Au. Despite this there is a clear
correlation between antimony mineralisation and weakly elevated gold values (Figure 2), with a clear
correlation for Sb and Au for mineralised (>1,000ppm Sb) samples. A similar relationship is also seen
between antimony and arsenic for the mineralised samples (Figure 2), with As values for individual
samples typically approximately one order of magnitude lower, or ~10% of the Sb grade. In both
cases, the relationship is less apparent for samples containing <1,000ppm Sb.
The correlation between antimony and gold is significant as it clearly indicates that gold is present
within the antimony mineralising system at Oaky Creek. In orogenic-epizonal vein systems such as
that seen at Oaky Creek, gold is precipitated at higher temperatures and greater depths than
antimony, which allows the possibility that potential future deep drilling may intersect stronger gold
mineralisation than that currently seen.
The correlation between antimony and arsenic is common for antimony mineral systems, due to the
similar chemistry of the two elements. This allows arsenic to be used as a pathfinder element for
antimony mineralisation, but high levels of arsenic can also pose issues in mineral processing of
antimony ores. The fact that As values for the drill samples are typically ~10% of the Sb assays is a
positive outcome that is consistent with Red Mountain’s strong trial metallurgical results reported in
May 2026 for a bulk surface sample from Oaky Creek North3
. This work delivered a high quality
concentrate containing 51.8% Sb and only 197ppm As, which would be an excellent feed stock for
pyrometallurgical processing to produce saleable Sb metal.
3
RMX ASX Announcement 25 May 2026. https://investorhub.redmountainmining.com.au/announcements/46b01X-exceptional-high-grade-
antimony-concentrate-from-met-work
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
6
Figure 2: Log-log plots of Sb vs Au (top) and Sb vs As (bottom) for drillhole assays from Oaky Creek South Main Grid. Samples that
recorded below detection values (<5ppm Sb, <5ppm As; and/or <1ppb Au) were excluded from the plots.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
7
Table 1: Summary of all anomalous (>500ppm Sb) antimony assays from Red Mountain Mining’s maiden RC drilling program at Oaky
Creek and mineralised intervals calculated using minimum cutoffs of 0.1% (1,000ppm) and 1% (10,000ppm) Sb. A full list of all antimony
assay results is provided in Appendix 1.
High resolution drone magnetic survey contracted for November prior to further planned
drilling
Interpretation of the structurally-controlled, vein-hosted antimony mineralisation at the Oaky Creek
prospect is made difficult due to the lack of good quality outcrop across the project area. Available
aeromagnetic data, which can be used to interpret structure, is relatively low resolution and was flown
for the NSW Department of Mineral Resources in 1999, on 250m-spaced east-west lines at an altitude
of 60m4
. Some structural features can be interpreted from the existing data, the line spacing and
survey height limit the resolution of the data and result in a north-south elongation of magnetic
features (Figure 3).
4
Peel magnetic and radiometric survey. https://minview.geoscience.nsw.gov.au/#/(dlmodal:geophys-survey-
air/AIR0079)?lon=150.4469&lat=-30.17071&z=11&bm=bm1&l=at2:y:100,gp117:y:100,gp10:y:100
From To >0.1% Sb cutoff >1% Sb cutoff
43 44 1 19662 1m @ 1.97% Sb
44 45 1 1519
86 87 1 37319
87 88 1 189794
88 89 1 24804
89 90 1 4856
90 91 1 3027
91 92 1 600
39 40 1 823
65 66 1 565
72 73 1 649
93 94 1 44343 1m @4.43% Sb
94 95 1 2836
50 51 1 809
62 63 1 626
69 70 1 1024 1m @ 0.10% Sb
77 78 1 72154 1m @ 7.22% Sb
OC26RC007 46 47 1 735
18 19 1 1347
19 20 1 2003
OC26RC012 2m @ 0.17% Sb
Hole
Depth(m) Interval
(m)
Sb ppm
Mineralised Intervals
OC26RC005
2m @1.06% Sb
5m @ 5.20% Sb
3m @ 8.40% Sb
2m @ 2.36% Sb
OC26RC002
OC26RC003
OC26RC004
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
8
Figure 3: Tilt angle filtered reduced to pole total magnetic intensity image of Peel survey data4 over Oaky Creek prospect showing the
location of Red Mountain Mining drill collars & the extent of the Company’s contracted drone magnetic survey, planned for November.
To better understand the structural controls on mineralisation at Oaky Creek prior to further drill
testing, Red Mountain will launch a 25m line-spaced drone magnetics over the Oaky Creek prospect,
which will be flown at a height of 25m above ground. This new data will be a dramatic improvement
on the existing 250m line-spaced, 60m elevation airborne magnetic coverage over the area and it is
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
9
hoped that it will allow a detailed structural reinterpretation to be completed prior to planned
additional drilling at Oaky Creek during 2027, which will likely include deeper drilling to follow up the
initial positive results at Oaky Creek South Main Grid, and further drilling to more effectively test the
four other known targets.
Oaky Creek represents a significant 3km long orogenic antimony system with multiple
drill targets
Figure 4: Location of LRV’s Hillgrove Mine and other Known NSW gold and antimony mineral occurrences relative to Red Mountain’s
Armidale Antimony-Gold Project and NSW basement orogenic units. The map clearly demonstrates the prospectivity of the New England
Orogen for antimony and gold. The location the Peel Fault is also shown.
The Oaky Creek prospect features quartz-carbonate-stibnite veins and breccias hosted within a tightly
folded and faulted sequence of metamorphosed Carboniferous mudstone, siltstone and fine
sandstone. The mineralisation has been targeted by two groups of shallow historical pits and shafts
at Oaky Creek North and Oaky Creek South.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
10
The Company’s initial sampling program at Oaky Creek comprised a 50m x 100m spaced grid soil
sampling program centered on a major splay of the Namoi Fault, accompanied by rock chip sampling.
As initially reported5
, the soil sampling defines a coherent, ~1.5km long, 100-200m wide, NNW-
trending >2ppm Sb in soil anomaly extending both north and south of the historical workings at
Oaky Creek North and a similarly-oriented ~1km long >2ppm Sb in soil anomaly extending north
from the Oaky Creek South workings.
Sampling campaigns at Oaky Creek67
, returned multiple rock chip samples8, 9, 10
with values of over
25% Sb and 0.1g/t Au for five different areas, with mineralised and anomalous rock samples showing
a strong spatial correlation to the antimony soil anomaly (Figure 5). When considered collectively, the
soil and rock chip results indicate a significant orogenic antimony mineral system with a strike extent
of 3km, which is analogous to Larvotto Resources’ (ASX: LRV; Market Cap. ~AU$400 million)
Hillgrove Project, which lies east of Red Mountain’s project area.
Red Mountain’s ~1300 sample infill hand auger soil sampling campaign across the full ~3km strike
extent of the Oaky Creek prospect was completed across the late 2025 and early 2026 to tighten the
Company’s existing 100m x 50m spaced soil grid in order to better constrain individual drill targets.
This detailed systematic work allowed the company to define five high priority orogenic antimony
targets11
for drill testing at Oaky Creek (Figure 5), four of which were initially drilled during the current
maiden drilling program.
In July 2026, Red Mountain also reported the results of a trial, four line dipole-dipole induced
polarisation (DDIP) survey over Oaky Creek South12
. Modelling of the data revealed a coherent NNE-
SSW-striking, steeply SE-dipping chargeability anomaly that extends beneath and at least 300m
southwest from outcropping quartz-carbonate-stibnite veins and shallow historical antimony workings
at the Oaky Creek South Workings (Figure 5). The anomaly shows a peak observed chargeability of
over 7.2 mV/V, compared to background values that typically range from 2 to 3 mV/V. The anomaly
5
RMX ASX Announcement 7 June 2025. https://investorhub.redmountainmining.com.au/announcements/6998482
6
RMX ASX Announcement 27 June 2025. https://investorhub.redmountainmining.com.au/announcements/7026204
7
RMX ASX Announcement 11 July 2025. https://investorhub.redmountainmining.com.au/announcements/7050680
8RMX ASX Announcement 2 October 2025. https://investorhub.redmountainmining.com.au/announcements/7181513
9
RMX ASX Announcement 15 January 2026. https://investorhub.redmountainmining.com.au/announcements/7325282
10
RMX ASX Announcement 12 March 2026. https://investorhub.redmountainmining.com.au/announcements/7435807
11
RMX ASX Announcement 30 March 2026. https://investorhub.redmountainmining.com.au/announcements/7467812
12
RMX ASX Announcement 9 July 2026. https://investorhub.redmountainmining.com.au/announcements/7624811
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
11
significantly increases the size of the Oaky Creek South Workings target and is modelled to extend
from surface to a depth of at least 200m, and over a strike extent of at least 400m, compared to the
~120m strike of surface vein mineralisation. It strengthens to the SSW and remains open in that
direction.
Red Mountain Armidale Antimony-Gold Project background
Red Mountain’s 100%-owned Armidale Antimony-Gold Project lies in the Southern New England
Orogen (SNEO) in northeastern New South Wales, approximately west of Australia’s largest known
antimony deposit, Larvotto’s (ASX: LRV) Hillgrove deposit, which is also the 8th
largest antimony
deposit globally. The SNEO is recognised as Australia’s premier Antimony province (Figure 4).
Red Mountain’s Armidale Antimony-Gold Project has an extensive 85km length along the western
side of the Peel Fault. The geology of the project area is dominated by isoclinally folded Carboniferous
metasediments of the Tamworth Belt, which is a forearc basinal package related to west-dipping
subduction of oceanic crust beneath the Lachlan Orogen. Ultramafic mélanges of the Great
Serpentinite Belt, which outcrop along the Peel Fault, are considered to be remnants of this oceanic
crust. The Peel Fault System has recognised world-class mineral potential, with over 400 known
orogenic gold and base metal mineral occurrences along its over 400km strike extent, but is
underexplored, with less than 200 mostly shallow drillholes over its length, the majority of which are
focused on discrete prospects. Oaky Creek is the company’s highest priority and most advanced
prospect within the project and is one of several known orogenic gold and antimony mineral
occurrences within the tenement (Figure 6).
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
12
Figure 5: (A) Google Earth image showing auger soil sampling completed over the Oaky Creek antimony prospect relative to contoured
conventional soil antimony values and antimony mineralised (>0.5% Sb) rock chip samples. The two insets show the NSW 5m digital
elevation model over the (B) Oaky Creek North Workings and Sb-bearing Creek Exposure; and (C) Oaky Creek South Main Grid and Oaky
Creek South Workings targets, showing auger antimony soil results, mapped quartz-carbonate-stibnite vein traces and drill hole locations
for Red Mountain Mining’s maiden RC drilling program For detail over Oaky Creek South Main Grid, refer to (Figure 2).
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
13
Figure 6: Geological Survey of NSW total magnetic intensity reduced to pole (TMI RTP) imagery13 and location of gold and antimony
mineral occurrences within and near to EL9732, summarising highlights of RMX’s exploration to date and the location of the Company’s
Oaky Creek and East Hills antimony prospects, Horsley Station gold prospect and Horsley North magnetic target. The mapped location of
the Peel Fault is also shown.
Authorised for and on behalf of the Board,
Mauro Piccini
Company Secretary
13
Matthews, S.J. 2024. New South Wales Statewide magnetic merge, version 3.0 [Digital Dataset]. Geological Survey of New South Wales,
Department of Primary Industries and Regional Development, Maitland.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
14
Disclaimer
In relying on the above mentioned ASX announcement and pursuant to ASX Listing Rule 5.23.2, the Company confirms that
it is not aware of any new information or data that materially affects the information included in the above-mentioned
announcement.
Forward–Looking Statements
Some of the statements appearing in this announcement may be in the nature of forward-looking statements. You should
be aware that such statements are only predictions and are subject to inherent risks and uncertainties. Those risks and
uncertainties include factors and risks specific to the industries in which Red Mountain operates and proposes to operate
as well as general economic conditions, prevailing exchange rates and interest rates and conditions in the financial markets,
among other things. Actual events or results may differ materially from the events or results expressed or implied in any
forward- looking statement. No forward-looking statement is a guarantee or representation as to future performance or any
other future matters, which will be influenced by a number of factors and subject to various uncertainties and contingencies,
many of which will be outside Red Mountain’s control.
About Red Mountain Mining
Red Mountain Mining Ltd (ASX: RMX, US CODE: RMXFF) is a Critical Minerals exploration and development company
focussed on accelerating development at its United States and Australia based Projects, located in Tier-1 Mining Districts.
Red Mountain is fast-tracking its Critical Minerals projects in the US and Australia, and the Board and Management is
determined to rapidly define a portfolio of advanced projects to assist the United States and other Western countries with
a reliable, high-quality source of commodity supply, including from the Company’s Armidale Antimony-Gold Project located
in NSW, Australia, which has delivered multiple high-grade antimony rock chip samples to date (up to 39.3% Sb); and its US
Critical Minerals Portfolio. comprising the Pioneer Tungsten Project in Montana, which encompasses the same geology
and exhibits the same skarn-style mineralisation as the 6.8Mt Gentung tungsten resource (owned by NASDAQ: ALM); the
Utah Antimony Project in the highly prospective Antimony Mining District of Utah, adjacent to the Antimony Canyon Project
(owned by ASX: AT4); the Thompson Falls Antimony Project with initial assay results of up to 36.5% Sb at historical mines
located near the NYSE: UAMY Antimony Smelter, and the Yellow Pine Antimony Project adjacent to Perpetua Resources’
(NASDAQ: PPTA) Stibnite Gold-Antimony project in Idaho.
Competent Person Statement
The information in this announcement that relates to Exploration Results and other technical information complies with the
2012 Edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves (JORC Code).
It has been compiled and assessed under the supervision of contract geologist Mark Mitchell. Mr Mitchell is a Member of
the Australasian Institute of Geoscientists and has sufficient experience that is relevant to the style of mineralisation and
type of deposit under consideration and to the activity being undertaken to qualify as a Competent Person as defined in
the 2012 Edition of the JORC Code. Mr Mitchell consents to the inclusion in this announcement of the matters based on
his information in the form and context in which it appears.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
15
JOIN THE RED MOUNTAIN MINING INVESTOR HUB
Visit https://investorhub.redmountainmining.com.au for access to the Investor Hub
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
16
Appendix 1
Antimony (Sb), gold (Au), silver (Ag) and arsenic (As) assay results for RC holes OC26RC001 to OC26RC009 from The
Oaky Creek Main Grid target. Anomalous to mineralised results are highlighted as follows:
Sb >10000 ppm 1000 - 10000 ppm 500 - 999 ppm
Au >1 ppm 0.5 - 1.0 ppm 0.1 - 0.499 ppm
Ag >10 ppm 5 - 10 ppm 1 - 4.9 ppm
As >10000 ppm 1000 - 10000 ppm 500 - 999 ppm
AnalyticalRange
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
17
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
18
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
19
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
20
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
21
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
22
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
23
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
24
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
25
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
26
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
27
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
28
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
29
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
30
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
31
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
32
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
33
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
34
JORC Code, 2012 Edition - Table 1
1.1 Section 1 Sampling Techniques and Data
Criteria JORC Code explanation Commentary
Sampling
techniques
• Nature and quality of sampling (e.g. cut
channels, random chips, or specific
specialised industry standard measurement
tools appropriate to the minerals under
investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc).
These examples should not be taken as
limiting the broad meaning of sampling.
• Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any measurement
tools or systems used.
• Aspects of the determination of
mineralisation that are Material to the
Public Report.
• In cases where ‘industry standard’ work has
been done this would be relatively simple
(eg ‘reverse circulation drilling was used to
obtain 1 m samples from which 3 kg was
pulverised to produce a 30 g charge for fire
assay’). In other cases more explanation
may be required, such as where there is
coarse gold that has inherent sampling
problems. Unusual commodities or
mineralisation types (eg submarine nodules)
may warrant disclosure of detailed
information.
• Slimline Reverse Circulation (RC)
drilling was completed using a 4”
face-sampling hammer.
• All RC drillholes were sampled on
continuous 1 m intervals irrespective
of lithological boundaries.
• Sample material was collected from
the fixed cone splitter collecting
approximately 2kg- 4kg of split
material to obtain representative
samples.
• Geological logging was completed
on every metre using representative
RC chips retained from each interval.
Drilling
techniques
• Drill type (e.g. core, reverse circulation,
open-hole hammer, rotary air blast, auger,
Bangka, sonic, etc) and details (e.g. core
diameter, triple or standard tube, depth of
diamond tails, face-sampling bit or other
type, whether core is oriented and if so, by
what method, etc).
• Durock Drilling supplied a track
mounted Slim Line RC rig, DAC150
with a 4”rock face sampling hammer
with compressed air.
• Drillholes were completed at the
planned orientations using surveyed
collar locations.
• Representative drill chips were
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
35
Criteria JORC Code explanation Commentary
collected at 1 m intervals for
geological logging and sampling.
Drill
sample
recovery
• Method of recording and assessing core
and chip sample recoveries and results
assessed.
• Measures taken to maximise sample
recovery and ensure representative nature
of the samples.
• Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse
material.
• Drill chips collected at 1m intervals from
a fixed cone splitter and the sample was
logged by coarser chips in the from the
green drill bag.
• For each 1m sample the recovery was
reported based on volume/weight
comparison down the hole and whether
or not moisture was present in the
sample.
• No relationship between sample
recovery and assay grade has been
established as this programme is
early-stage reconnaissance RC
drilling.
Loggin
Share your feedback
Discover