EXPLORATION COMMENCES AT ARMIDALE WITH NEW ANTIMONY OBSERVED
Released
Released
Announcement PDF
ASX: RMX
investorhub.redmountainmining.com.au info@redmountainmining.com.au Red Mountain Mining Ltd ACN 119 568 106
NEW ANTIMONY VEINS IDENTIFIED AS EXPLORATION
COMMENCES AT ARMIDALE ANTIMONY-GOLD PROJECT
HIGHLIGHTS
• Red Mountain has immediately commenced an expanded exploration program at the Oaky
Creek prospect within the Armidale Antimony-Gold Project which aims to define orogenic
Antimony-Gold targets for drill testing in 1H 2026
• New visible stibnite and stibiconite (visually estimated at up to approximately 65% combined*)
uncovered close to the southern end of the Oaky Creek North soil anomaly
• The Oaky Creek North sampling is targeting the 1.2km strike featuring Antimony in-soils that
was the Company’s primary initial target at the Oaky Creek prospect.
• At Oaky Creek South, the additional sampling will expand the existing coverage to include the
remainder of the coherent Antimony soil anomaly
• The auger sampling program will comprise approximately 900 samples and is planned for
completion during December, with all results expected to be received before the end of the
March Quarter of 2026
US Critical Minerals Portfolio Fast-Track Progress
• RMX’s US Critical Minerals assets continue to advance with assay results expected by the end
of January 2026 and potential expansion opportunities in the pipeline with a focus on
Antimony/Gold
• A successful $1.35m placement which received strong demand from sophisticated and family
office investors has strengthened Red Mountain’s balance sheet to fund planned exploration
activities in 2026
Red Mountain Mining Limited (ASX: RMX, US OTCQB: RMXFF, or “the Company”), a Critical
Minerals exploration and development company with an established and growing portfolio in Tier-1
Mining Districts in the United States and Australia, is pleased to announce the commencement and
immediate indicative success in its soil sampling program at Oaky Creek, one of numerous targets at
the Company’s 100% owned Armidale Antimony-Gold project, based in New South Wales, Australia.
Antimony mineralisation has been uncovered during the first two days of operation that are visually
estimated* to contain up to 60% stibnite (Sb2S3) and 5% of its oxide stibiconite (Sb3O6). RMX
commenced sampling this week at the Oaky Creek North strike extent. Multiple mineralised samples
were discovered and are found below (Figure 1; Table 1 - assays are expected in early January 2026).
ASX Announcement
4 December 2025
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
2
Figure 1 (top): Sample of massive stibnite float (AAR239) collected this week from Oaky Creek North. The sample is estimated to contain 60% stibnite and
5% stibiconite (refer to Table 1 for additional details).
Table 1 (bottom): Locations, descriptions and visually estimated stibnite and stibiconite contents of stibnite bearing samples collected during the first two
days of hand auger sampling at Oaky Creek North. For sample locations relative to previous soil sampling, refer to Figure 6.
*Important Cautionary Statement: Visual estimates of mineral abundance should never be considered
a proxy or substitute for laboratory analyses where concentrations or grades are the factor of
principal economic interest. Visual estimates also potentially provide no information regarding
impurities or deleterious physical properties relevant to valuations.
Easting Northing
AAR235 267373 6658705 Float: altered brecciated metasediment. 15 5
AAR236 267373 6658700 Float: altered metasediment. 10 0
AAR237 267453 6658526 Float: stbnite vein in hydrotherallyaltered metasediment. 20 2
AAR238 267416 6658560 Float:stibnite veined metasediment. 4 1
AAR239 267427 6658522 Float: massive stibnite. 60 5
AAR240 267444 6658535 Float: altered metasediments with quartz-carb rimmed stibnite veining. 15 2
Sample
GDA94 Zone 56
Description Stibnite % Stibiconite %
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
3
Oaky Creek is one of the Company’s highest priority prospects within the Armidale Antimony-Gold
Project and is one of several known orogenic gold and antimony mineral occurrences within the
tenement (Figure 7) that have strong structural, lithological and mineralogical similarities to Larvotto’s
(ASX: LRV; Market Cap $630M) Hillgrove deposit to the East, which is Australia’s largest antimony-
gold deposit. Red Mountain’s project features multiple prospects and covers nearly 400km2
of highly
prospective ground in the New England Oregon, Australia’s premier Antimony District.
Soil and rock chip sampling at Oaky Creek defines a 3km long orogenic Sb-Au system
The Oaky Creek prospect has been targeted by two groups of shallow historical pits and shafts at
Oaky Creek North and Oaky Creek South, which are thought to date from the late 19th Century, with
limited exploration since.
Since acquiring the project in December 2024, RMX has completed two field campaigns at the Oaky
Creek prospect. The Company’s initial sampling program at Oaky Creek comprised a 50 x 100m spaced
grid soil sampling program centred on a major splay of the Namoi Fault, accompanied by rock chip
sampling. As initially reported in June 20251
, the soil sampling defines a coherent, ~1.5km long, 100-
200m wide, NNW-trending >2ppm Sb in soil anomaly extending both north and south of the historical
workings at Oaky Creek North and a similarly-oriented ~1km long >2ppm Sb in soil anomaly
extending north from the Oaky Creek South workings (Figure 2), indicating a significant orogenic
antimony-gold mineral system with a strike extent of 3km.
Initial rock chip sampling, reported in June2
and July 20253
, returned values of up to 28.3% Sb and
0.54 g/t Au, with mineralised and anomalous rock chip samples showing a strong spatial correlation
to the antimony soil anomaly (Figure 2), and high grade (>25% Sb) mineralisation found to be
outcropping in a creek exposure 500m NNW of the historical workings at Oaky Creek North.
A second sampling program was undertaken in August and September 2025, with the collection of
additional rock chip samples at Oaky Creek South and Oaky Creek North, returning even stronger
results of up to 39.3% Sb8
and 1.09g/t Au4
and confirming the presence of a high-grade antimony
mineralisation with associated gold ~500m northwest of the Oaky Creek South workings.
1RMX ASX Announcement 7 June 2025. https://investorhub.redmountainmining.com.au/announcements/6998482
2RMX ASX Announcement 27 June 2025. https://investorhub.redmountainmining.com.au/announcements/7026204
3RMX ASX Announcement 11 July 2025. https://investorhub.redmountainmining.com.au/announcements/7050680
4RMX ASX Announcement 2 October 2025. https://investorhub.redmountainmining.com.au/announcements/7181513
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
4
Figure 2: Geological Survey of NSW total magnetic intensity reduced to pole (TMI RTP) imagery and location of gold and antimony mineral occurrences within and near to EL9732,
summarising highlights of RMX’s exploration to date and the location of the Oaky Creek and East Hills antimony prospects, Horsley Station gold prospect and Horsley North
magnetic target. The mapped location of the Peel Fault is also shown.
Antimony rock chip sample results are shown relative to the soil geochemistry in Figure 2, along
with a summary of the best rock chip antimony and gold results for the Oaky Creek prospect.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
5
Figure 3: Antimony rock chip and soil results for the Oaky Creek prospect, with peak rock chip values for antimony and gold listed for the three main target areas.
Initial sampling at Oaky Creek South highlights significant potential
In late August and early September, RMX’s field team collected a total of approximately 250 soil
samples spaced at 10m and 20m across two grids at Oaky Creek South: “Oaky S Main” (193 sample
sites) and “Oaky S Minor” (45 sample sites); as well as a single line of eight samples collected across
the Oaky Creek South workings.
The Oaky S Main grid is located approximately 400m north-northwest of the historical pits and
shafts at Oaky Creek South. The grid was targeted on a conventional soil sample anomaly with a
peak value of 333ppm Sb5
(Figure 3), which is associated with multiple mineralised float and in-situ
5RMX ASX Announcement 7 June 2025. https://investorhub.redmountainmining.com.au/announcements/6998482
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
6
rock chip samples, with maximum values of 39.3% Sb and 1.09g/t Au6
. The Oaky S Minor grid is
centred ~200m southeast of the Oaky S Main Grid, targeting a soil sample located 300m north of
the Oaky Creek South workings with a peak value of 46ppm Sb and 65ppm As5
(Figure 4).
Figure 4: Location of the planned auger sample area and hand auger samples collected in August and September 2025, relative to the conventional Sb soil anomaly, mineralised
(>0.5% Sb) rock chip samples, mapped quartz± carbonate±sulfide veins and the historical workings at Oaky Creek South.
6RMX ASX Announcement 2 October 2025. https://investorhub.redmountainmining.com.au/announcements/7181513
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
7
As reported in November7
, the auger samples collected from the Oaky S Main grid define a
coherent northeast-trending Sb-As anomaly, up to approximately 30m in width and 200m in length,
which parallels and overlaps the extent of mapped quartz±carbonate±sulfide veins, suggesting that
the auger soil sampling is able to directly map near-surface mineralisation. The core of the anomaly
is defined by nine samples containing >100ppm Sb, with a peak value of 1,201ppm Sb; and 27
samples containing >100ppm As, with a maximum value of 1,040ppm As (Figure 5). The anomaly
and vein sets appear to be offset along an approximately NW-striking fault, which may represent a
smaller splay structure off the NNW-striking major Namoi Fault splay that lies approximately 400m
east of the grid (refer to Figure 4) and is thought to be the primary controlling structure and fluid
conduit for the Oaky Creek antimony-gold system. The Oaky S Main grid hand auger antimony-
arsenic soil anomaly is open to the northeast, towards the Namoi Fault splay.
The Oaky S Minor grid is strongly anomalous for arsenic, with six samples containing >100ppm As,
with a maximum value of 257ppm7
. The samples define an anomaly, open to the southwest, that
parallels the Sb-As anomaly in the main grid, and may represent the fringes of a similar antimony-
rich vein system (Figure 5).
The strong positive results of the initial auger sampling at Oaky Creek South demonstrates both the
effectiveness of this method to directly map near-surface mineralisation and validity of the initial
conventional soil sampling as a targeting tool. It is anticipated that the results of this sampling will
allow the Company to identify priority targets for drill testing during the first half of 2026.
Sampling underway at Oaky Creek North – Antimony mineralisation sampled
The 1.2km long, NNW-striking coherent Oaky Creek North mineralisation was identified as the priority
target from Red Mountain’s initial soil sampling program at Oaky Creek and auger sampling
commenced at the southern end of the anomaly earlier this week (Figure 5). Approximately 400
samples will be collected along the full extent of the anomaly (Figure 6) at a spacing of 20m on east-
west oriented lines located 40m apart. (Figure 6).
7RMX ASX Announcement 27 November 2025. https://investorhub.redmountainmining.com.au/announcements/7282267
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
8
Figure 5: Location of the planned auger sample area relative to contoured antimony (top) and arsenic (bottom) hand auger results
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
9
Figure 6: Location of the planned auger sample area and recently collected stibnite-bearing float samples, relative to the conventional Sb soil anomaly, previously collected
mineralised (>0.5% Sb) rock chip samples, mapped quartz± carbonate±sulfide veins and the historical workings at Oaky Creek North.
As noted above, multiple exceptional antimony mineralised samples have been collected by the field
team during the first two days of sampling at Oaky Creek North (refer to Table 1). The newly collected
stibnite-bearing samples occur in an area where mineralised material has not previously been
observed (Figure 6). They correspond well to peak of the soil antimony anomaly and define a similar
north-northwest strike.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
10
Next steps for the Armidale Antimony-Gold Project
Red Mountain anticipates that the hand auger soil sampling program across Oaky Creek North and
Oaky Creek South will be completed during December, with all results expected to be received before
the end of the March Quarter of 2026. Based on the results from the previous auger sampling at Oaky
Creek South, the Company anticipates that the auger sampling will define multiple orogenic antimony-
gold targets for drill testing at Oaky Creek during the first half of 2026.
The Company is prioritising the advancement of the Oaky Creek prospect, while concurrently
commissioning a high resolution airborne magnetic-radiometric survey over the tenement to improve
data resolution and better map the structural architecture, to define additional orogenic antimony
and/or gold targets. The Company expects to acquire data during the first quarter of 2026.
Red Mountain expects that the improved resolution magnetic and radiometric data will allow Red
Mountain to better target planned initial soil sampling at the Horsley Station and Horsley North gold
targets and possible follow up work at the East Hils antimony-gold prospect, which has returned initial
rock chip results8
of up to 9.9% Sb and soil results9
of up to 109ppm Sb and 304ppm Sb. The locations
of these targets are shown on Figure 1.
The improved data will also allow the company to critically evaluate and rank stibnite and jarosite
satellite multispectral anomalies across the project that were reported in August 10
to identify
additional areas for priority ground follow up.
RMX Armidale Antimony-Gold Project Background
Red Mountain’s 100%-owned Armidale antimony-gold project (EL9372) lies west of Australia’s largest
known antimony deposit, Larvotto’s (ASX: LRV) Hillgrove deposit, which is also the 8th
largest antimony
deposit globally.
The New England Orogen is recognised as Australia’s premier Antimony province (Figure 7). Antimony
occurs in hydrothermal quartz veins, breccias and stockworks, often with associated gold and/or
tungsten mineralisation.
8RMX ASX Announcement 15 October 2025: https://investorhub.redmountainmining.com.au/announcements/7209330
9RMX ASX Announcement 27 November 2025. https://investorhub.redmountainmining.com.au/announcements/7282267
10RMX ASX Announcement 19 August 2025. https://investorhub.redmountainmining.com.au/announcements/7111098
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
11
Figure 7: Known NSW gold and antimony mineral occurrences relative to basement orogenic units. The map clearly demonstrates the prospectivity of the New England Orogen
for antimony and gold. The location of LRV’s Hillgrove Deposit, the Peel Fault and EL9732 are also shown.
The Armidale Antimony-Gold Project extends for 85km along the western side of the Peel Fault. The
geology of the project area is dominated by isoclinally folded Carboniferous metasediments of the
Tamworth Belt, which is a forearc basinal package related to west-dipping subduction of oceanic crust
beneath the Lachlan Orogen. Ultramafic mélanges of the Great Serpentinite Belt, which outcrop along
the Peel Fault, are considered to be remnants of this oceanic crust. The Peel Fault System has
recognised world-class mineral potential, with over 400 known orogenic gold and base metal mineral
occurrences along its over 400km strike extent, but is underexplored, with less than 200 mostly shallow
drillholes over its length, the majority of which are focused on discrete prospects.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
12
Red Mountain Successfully Completes Funding Initiative
Red Mountain’s immediate reporting of visible stibnite* on the second day of exploration has delivered
highly encouraging initial results for the technical team, this follows the Company’s announcement
on 27 November 2025 indicating the current fast-tracked program at the Armidale Antimony-Gold
Project.
Contemporaneously, the Company has received firm commitments from professional, sophisticated
and family office investors in a placement which was heavily oversubscribed, raising $1.35m at a 13%
discount to the last trade of 3c per share, and 20% discount to the 15-day VWAP, through the issuance
of approximately 51.9m shares under its current LR7.1A placement capacity. Placement participants
will receive 1-for-2 attaching unlisted options at a strike of 5c and expiry of 31 December 2028, which
will be issued subject to shareholder approval at an upcoming General Meeting.
Funds raised will be applied towards continued exploration at the Armidale Antimony–Gold Project.
In addition, a portion of the proceeds will support ongoing exploration across Red Mountain’s US
Critical Minerals Projects, together with the provision of general working capital to underpin the
Company’s operational and corporate activities.
Xcel Capital acted as lead manager to the placement and will be issued 8m lead manager shares, also
subject to shareholder approval at the next General Meeting.
The Company thanks its shareholders both in Australia and the United States, and its advisors for
their ongoing support as Red Mountain seeks to fast-track its Critical Minerals expansion.
Authorised for and on behalf of the Board,
Mauro Piccini
Company Secretary
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
13
About Red Mountain Mining
Red Mountain Mining Ltd (ASX: RMX, US CODE: RMXFF) is a Critical Minerals and Gold exploration and development company focussed
on accelerating its United States and Australia based assets, located in Tier-1 Mining Districts.
Red Mountain is fast-tracking its Critical Minerals projects in the US and Australia, and the Board and Management is determined to rapidly
define a portfolio of advanced projects to assist the United States and Western countries with a reliable, high-quality source of commodity
supply, including from the Company’s: Armidale Antimony-Gold Project located in NSW, Australia, which has delivered High-Grade
Antimony samples to date (up to 39.3% Sb) and US Critical Minerals Portfolio: Utah Antimony Project in the Antimony Mining District of
Utah, adjacent to Trigg Minerals’ Antimony Canyon Project (ASX: TMG), Yellow Pine Antimony Project, with historic workings, less than
2km from Perpetua’s Stibnite Project (NASDAQ: PPTA) in Idaho, Silver Dollar Antimony Project (Historic Antimony Mine), south of Yellow
Pine, reporting up to 17.7% Sb and US Lithium Projects in Nevada.
Competent Person Statement
The information in this announcement that relates to Exploration Results and other technical information complies with the 2012 Edition of
the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves (JORC Code). It has been compiled and
assessed under the supervision of contract geologist Mark Mitchell. Mr Mitchell is a Member of the Australasian Institute of Geoscientists
and has sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and to the activity being
undertaken to qualify as a Competent Person as defined in the 2012 Edition of the JORC Code. Mr Mitchell consents to the inclusion in
this announcement of the matters based on his information in the form and context in which it appears.
Disclaimer
In relying on the above mentioned ASX announcement and pursuant to ASX Listing Rule 5.23.2, the Company confirms that it is not aware
of any new information or data that materially affects the information included in the above-mentioned announcement.
JOIN THE RED MOUNTAIN MINING INVESTOR HUB
Visit https://investorhub.redmountainmining.com.au for access to the Investor Hub
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
14
JORC Code, 2012 Edition - Table 1
1.1 Section 1 Sampling Techniques and Data
Criteria JORC Code explanation Commentary
Sampling
techniques
• Nature and quality of sampling (e.g. cut
channels, random chips, or specific
specialised industry standard
measurement tools appropriate to the
minerals under investigation, such as
down hole gamma sondes, or handheld
XRF instruments, etc). These examples
should not be taken as limiting the
broad meaning of sampling.
• Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any
measurement tools or systems used.
• Aspects of the determination of
mineralisation that are Material to the
Public Report.
• In cases where ‘industry standard’ work
has been done this would be relatively
simple (eg ‘reverse circulation drilling
was used to obtain 1 m samples from
which 3 kg was pulverised to produce a
30 g charge for fire assay’). In other
cases more explanation may be required,
such as where there is coarse gold that
has inherent sampling problems. Unusual
commodities or mineralisation types (eg
submarine nodules) may warrant
disclosure of detailed information.
• Auger samples are being collected at
10/20m sample spacings along
traverses at 20/40/50m line spacing
with closer intervals around mineralised
rock sites.
• Auger samples are generally around
1kg raw samples taken from the C
Horizon.
• Rock samples are generally 1-2kg grab
samples, with float, subcrop and
outcrop samples collected.
• Rock chip samples are selective based
on visual appearance and are not used
for resource determination, only to see
if mineralisation is present.
• All samples are exploration in nature
and not for resource determination.
• Rock & Auger samples will be sent to
Intertek Townsville laboratory with the
auger forwarded on to the Perth
Laboratory. Auger samples are to be
treated by Aqua Regia AAR25MS52
package and the rocks by sodium
peroxide fusion FP6/OM for Sb, As and
W and FAA for Au.
Drilling
techniques
• Drill type (e.g. core, reverse circulation,
open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc) and details
(e.g. core diameter, triple or standard
tube, depth of diamond tails, face-
sampling bit or other type, whether core
is oriented and if so, by what method,
• No drilling reported
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
15
Criteria JORC Code explanation Commentary
etc).
Drill
sample
recovery
• Method of recording and assessing core
and chip sample recoveries and results
assessed.
• Measures taken to maximise sample
recovery and ensure representative
nature of the samples.
• Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse
material.
• No drilling reported.
Logging • Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate Mineral Resource estimation,
mining studies and metallurgical studies.
• Whether logging is qualitative or
quantitative in nature. Core (or costean,
channel, etc) photography.
• The total length and percentage of the
relevant intersections logged.
• No drilling reported.
• Rock and auger sampling will not be used
for resource estimation.
Sub-
sampling
techniques
and
sample
preparation
• If core, whether cut or sawn and whether
quarter, half or all core taken.
• If non-core, whether riffled, tube
sampled, rotary split, etc and whether
sampled wet or dry.
• For all sample types, the nature, quality
and appropriateness of the sample
preparation technique.
• Quality control procedures adopted for
all sub-sampling stages to maximise
representivity of samples.
• Measures taken to ensure that the
sampling is representative of the in situ
material collected, including for instance
results for field duplicate/second-half
sampling.
• Whether sample sizes are appropriate to
• Rock chip sampling is biased towards
outcrop that was altered and may
include samples from old workings.
• Rock grab samples will be taken raw
and approximately 1-2kg each.
• Auger samples are to be taken from
designated grid sites.
• For auger sites, Standards and blanks
are inserted every 100 sites and
repeats taken at every 100 sites.
• Grab rock samples are first pass with
size appropriate for initial work and
not intended for grade purposes.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
16
Criteria JORC Code explanation Commentary
the grain size of the material being
sampled.
Quality of
assay data
and
laboratory
tests
• The nature, quality and appropriateness
of the assaying and laboratory
procedures used and whether the
technique is considered partial or total.
• For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the
analysis including instrument make and
model, reading times, calibrations factors
applied and their derivation, etc.
• Nature of quality control procedures
adopted (e.g. standards, blanks,
duplicates, external laboratory checks)
and whether acceptable levels of
accuracy (i.e. lack of bias) and precision
have been established.
• Auger and Rocks are being treated at
Intertek and with standard procedure of
drying, crushed, pulverized (in Nickel
crucible for rock samples) with splits taken
25g charge of Aqua Regia and 50g charge
for rock (Faa and Fusion), all samples are
finished with ICP-MS.
• Sodium Peroxide fusion is considered an
appropriate method for antimony.
• Duplicates, blanks and standards (CRM) will
be inserted.
Verification
of
sampling
and
assaying
• The verification of significant
intersections by either independent or
alternative company personnel.
• The use of twinned holes.
• Documentation of primary data, data
entry procedures, data verification, data
storage (physical and electronic)
protocols.
• Discuss any adjustment to assay data.
• No drill holes reported.
• No assays reported.
Location of
data points
• Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and
other locations used in Mineral Resource
estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic
control.
• All sample taken with GPS readings with
site locations recorded in GDA94 (z56).
• No mineral resource estimation is being
conducted.
Data
spacing
• Data spacing for reporting of Exploration
Results.
• Whether the data spacing and
• Sample spacing is considered appropriate
for follow-up sampling aimed at delineating
drill targets.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
17
Criteria JORC Code explanation Commentary
and
distribution
distribution is sufficient to establish the
degree of geological and grade
continuity appropriate for the Mineral
Resource and Ore Reserve estimation
procedure(s) and classifications applied.
• Whether sample compositing has been
applied.
• Samples being exploration in nature any
sample results will not be considered
sufficient for any ore resource
determinations.
• No analytical compositing is being reported.
Orientation
of data in
relation to
geological
structure
• Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this is
known, considering the deposit type.
• If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to
have introduced a sampling bias, this
should be assessed and reported if
material.
• Rock samples were collected along outcrop
and float locations and for the former strike
and dip will be recorded where available.
Auger sampling is generally oriented to be
perpendicular the known mineralisation
trends.
• No drilling conducted.
Sample
security
• The measures taken to ensure sample
security.
• Samples are being managed by field staff,
individually double wrapped and sealed in a
1 ton bulk bag which will be dropped off in
a freight forwarding yard. .
Audits or
reviews
• The results of any audits or reviews of
sampling techniques and data.
• No audit or reviews of sampling techniques
and data was reported.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
18
1.2 Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria JORC Code explanation Commentary
Mineral
tenement and
land tenure
status
• Type, reference name/number, location
and ownership including agreements or
material issues with third parties such
as joint ventures, partnerships,
overriding royalties, native title
interests, historical sites, wilderness or
national park and environmental
settings.
• The security of the tenure held at the
time of reporting along with any known
impediments to obtaining a licence to
operate in the area.
• The Exploration licence EL9732 is granted
and 100% wholly owned by Red Mountain
Mining and covers 391km2
.
• The licence is in its first year of grant and
has no conflicts environmentally or with.
Native with the relevant claimant holders.
The licence covers freehold land with Land
Access agreement struck with local owners
using standard AMEC terms.
Exploration
done by other
parties
• Acknowledgment and appraisal of
exploration by other parties.
• The north-south elongate corridor covered
by the project contains no historical
mineral exploration drilling and has seen
limited previous surface exploration for
Antimony and Gold mineralisation
Share your feedback
Discover