STRONG TUNGSTEN GRADES AT PIONEER TUNGSTEN PROJECT MONTANA
Released
Released
Announcement PDF
ASX: RMX
investorhub.redmountainmining.com.au info@redmountainmining.com.au Red Mountain Mining Ltd ACN 119 568 106
SAMPLING CONFIRMS TUNGSTEN SKARN MINERALISATION AT
PIONEER TUNGSTEN PROJECT, MONTANA
HIGHLIGHTS:
• Analytical results for 30 rock chip samples from the Pioneer Tungsten Project in Montana,
have returned strongly anomalous tungsten (W) values, with a third of the samples collected
containing over 500ppm tungstate (WO3), with maximum values of 3,159ppm (0.32%) WO3
for a garnet skarn float sample from Red Mountain’s Greenstone claim area and 2,856ppm
(0.29%) WO3 from a skarn outcrop within the Mammoth claims.
• The best results returned comparable values to the grade of Almonty’s Gentung Tungsten
deposit, which lies within 200m of Red Mountain’s Mammoth claims.
• The results confirm the presence of garnet skarn hosted W mineralisation within Red
Mountain’s Pioneer Tungsten Project - with further, systematic sampling to be completed to
better define the extent, variability and continuity of the mineralisation, prior to a decision on
drill testing of one or more targets.
• The Pioneer Tungsten Project comprises three claim areas – Greenstone, Mammoth and Lost
Creek – located along the eastern margin of the Mount Torrey Batholith, which locally features
massive limestone-hosted garnet skarns, up to 25m thick. These skarns are known to contain
Tungsten mineralisation as scheelite (CaWO4).
• Red Mountain’s Pioneer Tungsten Project claims encompass similar geology and lie adjacent
to claims purchased in November 2025 by Almonty Industries (Market Cap AU$6.7 billion),
hosting the Gentung Tungsten Deposit, with a mineral resource of 6.83Mt @ 0.315% WO3; as
well as the Ivanhoe and Lost Creek Mines, which are estimated to have collectively produced
680kt of Tungsten ore in the 1950s and 1970s.
• Further systematic sampling at the highest priority Greenstone prospect is planned for mid-
July, with the Company expecting to be able to move rapidly to drill testing of downdip
extensions of skarn mineralisation, subject to positive analytical results.
• Drilling at the Armidale Antimony-Gold Project in NSW will commence this month with the
drilling contractor secured.
ASX Announcement
1 July 2026
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
2
Red Mountain Mining Limited (ASX: RMX, US OTCQB: RMXFF, or “the Company”), a Critical
Minerals exploration and development company with an established portfolio in Tier-1 Mining Districts
in the United States and Australia, is pleased to announce that it has received analytical results for 30
due diligence rock-chip samples collected from the Mammoth and Greenstone prospects – two of
the three areas that comprise the Company’s 100% owned Pioneer Tungsten Project in Montana,
USA (Figure 1).
Figure 1: Surface geology of the eastern margin of the Pioneer Batholith in Montana, showing the location of Red Mountain’s Mammoth, Lost Creek & Greenstone claim areas,
Almonty Industry’s claims, the Ivanhoe, Lost Creek and Greenstone mines, and published USGS tungsten occurrences. Geology after McDonald and Yakovlev (2019)1
, Zen (1988)2
&
McDonald et al. (2012)3
.
1
https://ngmdb.usgs.gov/Prodesc/proddesc_108777.htm
2
https://ngmdb.usgs.gov/Prodesc/proddesc_21817.htm
3
https://ngmdb.usgs.gov/Prodesc/proddesc_97585.htm
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
3
Ten of the 30 samples (refer to Appendix 1) were found to contain over 500ppm tungstate (WO3),
with five samples from the Greenstone area assaying at over 1,000ppm (0.10%) WO3, with a maximum
value of 3,159ppm (0.32%) WO3 (Figure 2); and one sample from the Mammoth prospect returning
a result of 2,856ppm (0.29%) WO3 (Figure 3). Six of the samples from the Greenstone area, including
three samples containing >500ppm WO3, lie north of Red Mountain’s current claim footprint, within
an area that the Company has staked and expects to be granted by the end of July 2026.
Figure 2: Location of Red Mountain’s Greenstone claims and surface sample WO3 results over (Left) Google satellite image and (Right) surface geology and topography of the
mapped outcropping garnet skarn with samples containing >1000ppm (0.1%) WO3 highlighted. The location of outcropping garnet skarn is after Pattee (1960)4
. Sample coordinates,
field descriptions, and analytical results for W, Mo, Au, Ag, Cu, Pb and Zn are provided in Appendix 1. The samples that lie outside of the current RMX Greenstone claim footprint are
within an area that Red Mountain has staked and expects be granted before the end of July 2026. These samples are listed as being from Greenstone N in Appendix 1.
4
Pattee, E.C., 1960. U.S. Bureau of Mines, Report of Investigation 5552. https://digital.library.unt.edu/ark:/67531/metadc38682/m2/1/high_res_d/metadc38682.pdf
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
4
Figure 3: Location of Red Mountain’s Mammoth claims and surface sample WO3 results over (Left) Google satellite image and (Right) surface geology and topography of the sampled
area, with samples containing >1000ppm (0.1%) WO3 highlighted. Sample coordinates, field descriptions, and analytical results for W, Mo, Au, Ag, Cu, Pb and Zn are presented in
Appendix 1.
Further sampling to define potential drill targets
The assay results confirm the presence of garnet skarn hosted Tungsten mineralisation at surface
within Red Mountain’s Pioneer Tungsten Project, with the best results returning comparable values to
the grade of Almonty’s Gentung tungsten deposit, which lies within 200m of Red Mountain’s
Mammoth claims and has an estimated mineral resource of 6.83Mt @ 0.315% WO3
3
. Further systematic
sampling will be completed by Red Mountain to better define the extent, variability and continuity of
the surface mineralisation. This work will initially focus on the highest priority Greenstone prospect,
with sampling planned for mid-July, following which the Company expects to be able to move rapidly
to drill testing of downdip extensions of skarn mineralisation, subject to positive analytical results.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
5
Pioneer Project Geology
The Pioneer Tungsten Project claims cover three discrete locations, the Greenstone, Mammoth and
Lost Creek prospects, where the eastern margin of the Uphill Creek Granodiorite is in direct contact
at surface with the Snowcrest Range Group (Figure 1). Red Mountain’s claims encompass Tungsten-
bearing skarn mineralisation mapped and sampled in the middle of last century and a number of
historical workings still visible today. The claims also lie immediately adjacent to claims purchased in
November 20255
by Almonty Industries (NASDAQ: ALM / TSX: AII / ASX: AII / Frankfurt: ALI1;
Market Cap AU$6.7 billion), which include the Gentung Tungsten Deposit, which has a total mineral
resource of 6.83 Mt @ 0.315 % WO3
6
; as well as the Ivanhoe and Lost Creek Mines, which are
estimated to have collectively produced 680kt of tungsten ore in the 1950s and from 1970 to 19756
.
In addition to the exposures of garnet skarn at surface, Red Mountain’s claims also have clear
geological potential for limestone-hosted tungsten-bearing garnet skarn mineralisation at shallow
depths beneath overlying quartzite units, where magnetic modelling undertaken by Arrow
Geosciences, indicates subsurface magnetic bodies, interpreted to represent the granodiorite source
of the skarn mineralisation7
.
The Torrey Batholith is a large volume composite complex that forms the core of the Pioneer
Mountains in southwest Montana. The batholith ranges in composition from gabbro to granite, but
is dominantly granodioritic in composition. Tungsten mineralisation occurs along the entire eastern
contact of the Pioneer Batholith where it is in contact with mid-Paleozoic carbonate-rich sedimentary
rocks (Figure 1), but to date significant mineralisation, occurring in scheelite-bearing massive garnet
skarns, has only been found where the limestones of the Snowcrest Range Group contact the Uphill
Creek Granodiorite. Significantly, there does not appear to be any skarn development or tungsten
mineralisation associated with the Grayling Lake Granite, which cuts and is therefore younger than
the granodiorite and associated skarn mineralisation at the Mammoth Prospect.
5
ALM press release 17/11/2025. https://press.almonty.com/almonty-advances-intent-to-become-the-leading-u-s-integrated-tungsten-producer-with-acquisition-of-gentung-browns-lake-
tungsten-project-in-montana/
6
RMX ASX Announecment 09/06/2026. https://investorhub.redmountainmining.com.au/announcements/7574526
7
Nelson et al., 2012. https://almonty.com/wp-content/uploads/2025/11/Lentung-43-101.pdf
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
6
Historical tungsten production
The earliest recorded interest in the garnet skarn hosted tungsten mineralisation surrounding the
Mount Torrey Batholith dates from the early 1950s, driven by the US Federal Government’s strategic
metal stockpiling program, with significant production recorded from the Ivanhoe and Lost Creek
mines (Figure 1). Exploration for tungsten was carried out between 1951 and 1953 around the Ivanhoe
Mine (also known as the Brown’s Lake Mine), which had been mined for copper, silver and gold in
1928 and 1929, recording production of 5.7t Cu; 647 oz Ag and 1 oz Au8
. Open pit tungsten
production from the Ivanhoe Mine commenced in October 1953 and initially ceased in 1957, with
total production during this period of 567kt at an average grade of 0.35% WO3
9
. Similar skarn-hosted
tungsten mineralisation was mined by the Minerals Engineering Company between 1952 and 1956
from a series of adits and small open pits at the Lost Creek Mine, ~5km southeast of Ivanhoe. The
total recorded production from Lost Creek during this period is 19kt at an average grade of 0.18%
WO3
8
. Both mines remained idle until 1971, when General Electric purchased the properties and rebuilt
the mill at Ivanhoe, which operated until 1975. Minor Tungsten production is also recorded from the
Greenstone Mine during the 1950s, with recorded production of 900kg of sorted ore, containing 1.2%
WO3
9
. It is estimated that total production from the district from the 1950s and 1970s is approximately
680kt of tungsten ore10
.
Authorised for and on behalf of the Board,
Mauro Piccini
Company Secretary
Disclaimer
In relying on the above mentioned ASX announcement and pursuant to ASX Listing Rule 5.23.2, the Company confirms that
it is not aware of any new information or data that materially affects the information included in the above-mentioned
announcement.
8
Geach, R.D., 1972. Montana: Montana Bureau of Mines and Geology Bulletin 85. https://www.mbmg.mtech.edu/mbmgcat/public/ListCitation.asp?pub_id=10086&#gsc.tab=0
9
Pattee, E.C., 1960. U.S. Bureau of Mines, Report of Investigation 5552. https://digital.library.unt.edu/ark:/67531/metadc38682/m2/1/high_res_d/metadc38682.pdf
10
Nelson et al., 2012. NI 43-101 Technical Report of the Lentung (Gentung) Tungsten & Garnet Deposit https://almonty.com/wp-content/uploads/2025/11/Lentung-43-101.pdf
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
7
Forward–Looking Statements
Some of the statements appearing in this announcement may be in the nature of forward-looking statements. You should
be aware that such statements are only predictions and are subject to inherent risks and uncertainties. Those risks and
uncertainties include factors and risks specific to the industries in which Red Mountain operates and proposes to operate
as well as general economic conditions, prevailing exchange rates and interest rates and conditions in the financial markets,
among other things. Actual events or results may differ materially from the events or results expressed or implied in any
forward- looking statement. No forward-looking statement is a guarantee or representation as to future performance or any
other future matters, which will be influenced by a number of factors and subject to various uncertainties and contingencies,
many of which will be outside Red Mountain’s control.
Competent Person Statement
The information in this announcement that relates to Exploration Results and other technical information complies with the
2012 Edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves (JORC Code).
It has been compiled and assessed under the supervision of contract geologist Mark Mitchell. Mr Mitchell is a Member of
the Australasian Institute of Geoscientists and has sufficient experience that is relevant to the style of mineralisation and
type of deposit under consideration and to the activity being undertaken to qualify as a Competent Person as defined in
the 2012 Edition of the JORC Code. Mr Mitchell consents to the inclusion in this announcement of the matters based on
his information in the form and context in which it appears.
About Red Mountain Mining
Red Mountain Mining Ltd (ASX: RMX, US CODE: RMXFF) is a Critical Minerals exploration and development company
focussed on accelerating development at its United States and Australia based Projects, located in Tier-1 Mining Districts.
Red Mountain is fast-tracking its Critical Minerals projects in the US and Australia, and the Board and Management is
determined to rapidly define a portfolio of advanced projects to assist the United States and other Western countries with
a reliable, high-quality source of commodity supply, including from the Company’s Armidale Antimony-Gold Project located
in NSW, Australia, which has delivered multiple high-grade antimony rock chip samples to date (up to 39.3% Sb); and its US
Critical Minerals Portfolio. comprising the Pioneer Tungsten Project in Montana, which encompasses the same geology
and exhibits the same skarn-style mineralisation as the 6.8Mt Gentung tungsten resource (owned by NASDAQ: ALM); the
Utah Antimony Project in the highly prospective Antimony Mining District of Utah, adjacent to the Antimony Canyon Project
(owned by ASX: AT4); the Thompson Falls Antimony Project with initial assay results of up to 36.5% Sb at historical mines
located near the NYSE: UAMY Antimony Smelter, and two Idaho Antimony Projects.
JOIN THE RED MOUNTAIN MINING INVESTOR HUB
Visit https://investorhub.redmountainmining.com.au for access to the Investor Hub
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
8
Appendix 1
NAD83 UTM 12 coordinates, field descriptions and analytical results and methods for W, Mo, Au, Ag, Cu, Pb and Zn
for rock chip samples collected from the Mammoth and Greenstone claim areas. Anomalous results with >500ppm
WO3, >200ppm Mo, >0.5ppm Au, >10ppm Ag, and >1000ppm Cu, Pb or Zn are highlighted red.
Note: W was analysed independently as part of two multielement suites (ME-MS61 and ME-MS81), with good correlation
and both results are shown, as well as an average value and WO3 content, which is calculated from the average. Ore grade
Cu (>10000ppm) and Ag (>100ppm) analysed by OG62.
mE mN
663911 Greenstone 358709 5030088
Sample taken from from historical trench wall in Cut #6 -
probable 1951 bulk sample location. Pale green to green
skarn with <0.5 % garnet stringers up to 2mm thick.
560 566 563.0 710.0 68.9 <0.005 0.06 10 4.9 41
663912 Greenstone 358712 5030117
Outcrop. Pale green garnet skarn. Quartz rich with <0.5%
garnet veinlets up to 2mm thick.
640 665 652.5 822.9 56.6 <0.005 0.03 7.1 2.7 55
663913 Greenstone N 358752 5030181
Subcrop and float from road cut. Granite + garnet skarn with
~1% garnet comprising subhedral garnets up to 4mm in size
and garnet veinlets up to 2mm thick.
430 436 433.0 546.1 248 <0.005 0.03 4.2 3.5 53
663914 Greenstone N 358732 5030336
Roadside waste pile from the nearby historical Greenstone (?)
mine. Comprises altered granite with scattered subhedral
garnets up to 5mm in size and ~20% malachite.
204 169.5 186.8 235.5 7.8 0.533 60.4 43300 11.1 1035
663915 Greenstone N 358764 5030473
Quartz-manganese-chlorite skarn with minor malachite
veining up to 4cm thick in bleached white sandstone.
810 813 811.5 1023.4 79.2 2.66 321 67200 219 392
663916 Greenstone N 358756 5030675
Chloritic granite from 1951 prospecting trench high on
mountain. Moderate to strong FeOx + MnOx.
20.4 20.2 20.3 25.6 16.3 0.016 3.64 806 972 634
663917 Greenstone 358692 5029901
Float. Moderately oxidized garnte skarn with ~0,5% garnet
veinlets up to 1mm thick. Proximal to 1951 prospecting
trenches.
930 972 951.0 1199.3 70 0.03 3.03 712 8.3 45
663918 Greenstone 358686 5029845
Bleached and altered sandstone with ~5% semi-druzy
stockwork quartz veinlets up to 5mm in width.
6.9 7 7.0 8.8 0.57 0.138 0.07 31.4 24.8 34
663919 Greenstone 358640 5029481
Waste pile from angled shaft still open to ~6m in depth.
Granite with pervasive moderate chlorite alteration and ~5%
pyroxene crystals up to to 2mm in size.
23.1 22.7 22.9 28.9 2.97 <0.005 0.11 22.7 2.9 64
663920 Mammoth 355580 5043754
Test pit waste pile. Light mint green moderately argilized
garnet skarn material.
1.3 1.1 1.2 1.5 0.47 <0.005 0.04 13.4 5.7 111
663921 Mammoth 355616 5043586
Garnet skarn outcrop near the Mammoth Adit with poddy
granualr quartz veins up to 5mm thick and ~2% brown
pyroxene blebs and veinlets up to 1cmin size.
62.1 48.3 55.2 69.6 8.69 <0.005 0.17 28.1 7.4 75
663922 Mammoth 355680 5043569
Skarn outcrop at entrance to a collapsed cave. Sample is
dominated by malachite and manganese with minor
chalcopyrite and rare bornite.
2170 2360 2265.0 2856.4 269 2.25 1325 191500 2200 354
663923 Mammoth 355674 5043420
Outcrop of strongly oxidised and pervasive argillic altered
granite.
58.4 45.9 52.2 65.8 6.19 <0.005 1.44 391 12.7 40
663924 Mammoth 355682 5043363
Float sample of garnet skarn with pyroxene blebs up to 3cm
in size.
58.3 51.1 54.7 69.0 7.26 0.029 21.9 3470 50.9 84
732285 Greenstone 358706 5030094
Trench wall above 1951 drillholes WDH1 in Cut #6A. Garnet
skarn with garnets up to 5mm in size.
246 238 242.0 305.2 25.9 <0.005 0.07 4.1 4.8 35
732286 Greenstone N 358744 5030165 Altered granite with ~1mm garnets. 1590 1645 1617.5 2039.8 851 <0.005 0.04 6 5.8 24
732287 Greenstone N 358754 5030678
Strongly oxidised skarn?, with heavy Fe-oxide staining and
some sulfides.
27.8 25.5 26.7 33.6 45.2 <0.005 2.8 727 217 617
732288 Mammoth 355692 5043609
Mammoth Adit outcrop, greenish gray skarn with ~2% 0.5-
1mm garnet.
2.5 2.2 2.4 3.0 2.41 <0.005 0.19 84.1 15 82
732289 Mammoth 355691 5043607
Mammoth Adit outcrop, greenish gray skarn with ~2% 0.5-
1mm garnet.
5.8 5.2 5.5 6.9 3.85 <0.005 0.03 11.1 7.5 63
732290 Mammoth 355683 5043603
Mammoth Adit outcrop, greenish gray skarn with ~2% 0.5-
1mm garnet.
0.7 0.5 0.6 0.8 0.93 <0.005 0.06 6.6 4.6 63
732291 Mammoth 355686 5043604
Mammoth Adit outcrop, greenish gray skarn with ~2% 0.5-
1mm garnet.
0.7 0.9 0.8 1.0 0.99 <0.005 0.22 23.8 15.6 103
732292 Mammoth 355680 5043572 Calc-silicate skarn or hornfels with traces of epidote. 67.6 70.7 69.2 87.2 21 0.009 0.13 78.7 7.6 70
732293 Mammoth 355680 5043572 Light mint green moderately argilized garnet skarn material. 13.6 12.4 13.0 16.4 3.25 <0.005 0.45 40.7 6.7 292
732294 Mammoth 355676 5043427
Outcrop of strongly oxidised and pervasive argillic altered
granite.
55.9 51.8 53.9 67.9 6.09 <0.005 0.21 203 8.8 36
732295 Greenstone 358710 5029911
Float from within 1951 Cut #1. Moderately oxidised skarn
with ~1-2% garnet veinlets up to 5mm in thickness. Proximal
to historical prospecting trenches.
219 206 212.5 268.0 26 <0.005 0.05 9 7.6 41
732296 Greenstone 358718 5030073
Pale green to green skarn (?) with <0.5% garnet stringers up to
1mm thick.
335 364 349.5 440.8 29.8 <0.005 0.03 31.1 6 18
732297 Greenstone 358727 5030074
Dark greenish-gray, fine-medium grained calc silicate, with
proxene blebsup to 1cm in size.
570 553 561.5 708.1 85.1 <0.005 0.03 3.9 3.5 76
732298 Greenstone 358743 5030056
Float near 1951 access road. Moderately oxidised skarn with
garnet veinlets up to 2mm thick. Proximal to historical
prospecting trenches.
139 140 139.5 175.9 37.3 <0.005 0.04 3.4 4.6 44
732299 Greenstone 358770 5030047
Float near 1951 access road. Moderately oxidised skarn with
garnet veinlets up to 2mm thick. Proximal to historical
prospecting trenches.
2430 2580 2505.0 3159.0 360 <0.005 0.05 4.8 6.5 50
732300 Greenstone 358755 5030046
Float near 1951 access road. Moderately oxidised skarn with
garnet veinlets up to 2mm thick. Proximal to historical
prospecting trenches.
1620 1695 1657.5 2090.3 216 <0.005 0.05 4.5 6.8 53
W ppm
MS81
Sample
Number
Prospect
NAD83 UTM Zone 12
Field Description
W ppm
MS61
Pb ppm
MS61
Zn ppm
MS61
W ppm
Ave.
WO3
ppm
Au ppm
AA23
Ag ppm
MS61*
Cu ppm
MS61*
Mo ppm
MS61
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
9
JORC Code, 2012 Edition - Table 1
1.1 Section 1 Sampling Techniques and Data
Criteria JORC Code explanation Commentary
Sampling
techniques
• Nature and quality of sampling (e.g. cut
channels, random chips, or specific
specialised industry standard
measurement tools appropriate to the
minerals under investigation, such as
down hole gamma sondes, or handheld
XRF instruments, etc). These examples
should not be taken as limiting the broad
meaning of sampling.
• Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any
measurement tools or systems used.
• Aspects of the determination of
mineralisation that are Material to the
Public Report.
• In cases where ‘industry standard’ work
has been done this would be relatively
simple (eg ‘reverse circulation drilling was
used to obtain 1 m samples from which 3
kg was pulverised to produce a 30 g
charge for fire assay’). In other cases more
explanation may be required, such as
where there is coarse gold that has
inherent sampling problems. Unusual
commodities or mineralisation types (eg
submarine nodules) may warrant
disclosure of detailed information.
• Surface rock chip samples between 1.5kg
and 4kg in weight collected by hand from
insitu outcrop, waste piles from historical
workings and float; as described in
Appendix 1.
• Samples are indicative of surface geology
and are not intended to be representative
of overall geochemistry.
• All samples were analysed at ALS in Reno,
Nevada, USA, and Vancouver, Canada, by
multiple methods as summarised in
Appendix 1.
MS61 = four acid digest ICP-MS
MS81 = lithium borate fusion disk ICP- MS
AA23 = 30g fire assay Au with AAS finish
OG62 = four acid digest ore grade assay
Drilling
techniques
• Drill type (e.g. core, reverse circulation,
open-hole hammer, rotary air blast, auger,
Bangka, sonic, etc) and details (e.g. core
diameter, triple or standard tube, depth of
diamond tails, face-sampling bit or other
type, whether core is oriented and if so,
by what method, etc).
• No drilling results are reported.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
10
Criteria JORC Code explanation Commentary
Drill
sample
recovery
• Method of recording and assessing core
and chip sample recoveries and results
assessed.
• Measures taken to maximise sample
recovery and ensure representative nature
of the samples.
• Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse
material.
• No drilling results are reported.
Logging • Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate Mineral Resource estimation,
mining studies and metallurgical studies.
• Whether logging is qualitative or
quantitative in nature. Core (or costean,
channel, etc) photography.
• The total length and percentage of the
relevant intersections logged.
• No drilling results are reported.
• Visual field descriptions of rock chip
samples made by a qualified experienced
geologist are provided in Appendix 1.
Sub-
sampling
techniques
and
sample
preparation
• If core, whether cut or sawn and whether
quarter, half or all core taken.
• If non-core, whether riffled, tube sampled,
rotary split, etc and whether sampled wet
or dry.
• For all sample types, the nature, quality
and appropriateness of the sample
preparation technique.
• Quality control procedures adopted for all
sub-sampling stages to maximise
representivity of samples.
• Measures taken to ensure that the
sampling is representative of the in situ
material collected, including for instance
results for field duplicate/second-half
sampling.
• Whether sample sizes are appropriate to
the grain size of the material being
• Outcrop rock chip samples are collected as
representative of the sampled geological
unit.
• Float and waste dump samples are not
representative of overall geology but are
collected as potential indicators to nearby
insitu material of unknown location and
scale.
• The surface sampling is reconnaissance in
nature and designed to be indicative
rather than fully quantitative. No duplicate
samples were collected for analysis and no
blind standards were submitted with the
samples.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
11
Criteria JORC Code explanation Commentary
sampled.
Quality of
assay data
and
laboratory
tests
• The nature, quality and appropriateness of
the assaying and laboratory procedures
used and whether the technique is
considered partial or total.
• For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the
analysis including instrument make and
model, reading times, calibrations factors
applied and their derivation, etc.
• Nature of quality control procedures
adopted (e.g. standards, blanks,
duplicates, external laboratory checks) and
whether acceptable levels of accuracy (i.e.
lack of bias) and precision have been
established.
• Rock chip samples were assayed using a
total digest as described above.
• No sample duplicates or blind standards
were inserted. ALS is an accredited
laboratory with strong internal QA/QC.
USGS Data Sets Used
• The 2023 USGS Butte extension of the
airborne magnetic and radiometric
survey of the Boulder Batholith region
of Montana was flown by helicopter
on 200m spaced East-West lines at a
nominal terrain clearance of 100m,
with North-South oriented control
lines spaced at 2000m.
• All survey data, metadata and relevant
contractor reports are available for
download using THIS LINK
• Surface geology was mapped by the
US Geological Survey Co-operative
Geological Mapping programme
released in 2020 (GeMS) under the
geological Map Schema.
Verification
of
sampling
and
assaying
• The verification of significant intersections
by either independent or alternative
company personnel.
• The use of twinned holes.
• Documentation of primary data, data
entry procedures, data verification, data
storage (physical and electronic)
protocols.
• Discuss any adjustment to assay data.
• No drill intersections are reported.
Location of
data points
• Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and
• Rock chip sample locations were recorded
using a handheld Garmin GSMAP67 had
held GPS unit, which has a reported single
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
12
Criteria JORC Code explanation Commentary
other locations used in Mineral Resource
estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic
control.
reading accuracy of 1.5m to 3m.
Gentung Mineral Resource
• Resource estimate report prepared in 2012
using the Canadian Institute of Mining,
Metallurgy, and Petroleum (CIM) “Best
Practices and Reporting Guidelines” for
disclosing mineral exploration information,
the Canadian Securities Administrators
revised regulations in NI 43-101 (Standards
of Disclosure for Mineral Projects and
Companion Policy 43-101 CP, and CIM
Definition Standards for Mineral Resources
and Mineral Reserves.
Data
spacing
and
distribution
• Data spacing for reporting of Exploration
Results.
• Whether the data spacing and distribution
is sufficient to establish the degree of
geological and grade continuity
appropriate for the Mineral Resource and
Ore Reserve estimation procedure(s) and
classifications applied.
• Whether sample compositing has been
applied.
• Reconnaissance rock chip sampling only.
Not intended to establish geological
continuity.
• Sampling spacing was biased towards
areas where garnet skarn and tungsten
mineralisation had previously been
reported.
• The reporting of the results in this release
is to indicate that mineralisation exists in
the area, but no resource is presented in
this release.
• No analytical compositing has been
applied
Orientation
of data in
relation to
geological
structure
• Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this is
known, considering the deposit type.
• If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to
have introduced a sampling bias, this
should be assessed and reported if
material.
• Reconnaissance rock chip sampling only.
Not intended to be representative of
overall geology.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
13
Criteria JORC Code explanation Commentary
Sample
security
• The measures taken to ensure sample
security.
• Samples were collected by the geologist
and delivered directly to the analytical
laboratory.
Audits or
reviews
• The results of any audits or reviews of
sampling techniques and data.
• No audit or reviews of sampling
techniques and data have been
undertaken.
1.2 Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria JORC Code explanation Commentary
Mineral
tenement
and land
tenure status
• Type, reference name/number, location
and ownership including agreements or
material issues with
Share your feedback
Discover