ARMIDALE ANTIMONY TARGET EXPANDED AHEAD OF JULY DRILLING
Released
Released
Announcement PDF
ASX: RMX
investorhub.redmountainmining.com.au info@redmountainmining.com.au Red Mountain Mining Ltd ACN 119 568 106
IP EXTENDS ANTIMONY TARGET STRIKE AT OAKY CREEK SOUTH
DRILL TESTING TO COMMENCE IN TWO WEEKS
HIGHLIGHTS:
2D and 3D modelling of recently collected dipole-dipole induced polarisation (DDIP) data from
Oaky Creek South has revealed a coherent NNE-SSW-striking, steeply SE-dipping chargeability
anomaly that extends beneath and southwest from outcropping quartz-carbonate-stibnite
veins and shallow historical antimony workings at the Oaky Creek South prospect within Red
Mountain’s Armidale Antimony-Gold Project in New South Wales, Australia.
The anomaly shows a peak observed chargeability of over 7.2 mV/V, compared to background
values that typically range from 2 to 3 mV/V. It is modelled to extend over a strike extent of
at least 400m, compared to the ~120m strike of surface vein mineralisation at Oaky Creek
South, with a vertical extent of over 100m. It strengthens to the SSW and remains open in
that direction.
The chargeability anomaly will be tested as part of Red Mountain’s maiden reverse circulation
(RC) drilling program at Oaky Creek, which is scheduled to commence the week beginning
Monday 20 July 2026, with Durock Drilling contracted to complete the work.
The program will comprise up to 32 RC drillholes to a maximum depth of 300m, which will
allow initial drill testing of key priority targets defined by the Company’s extensive surface
geochemical sampling program at Oaky Creek.
Importantly, the approved drilling program allows the Company the flexibility to adjust drill
locations in response to initial results, for example to test for depth or strike extensions to
early mineralised intercepts.
Drilling is expected to be completed in August with assay results from the drilling program
expected to be received this Quarter.
Oaky Creek is Red Mountain’s most advanced target within the 391 km2
Armidale Antimony-
Gold Project, located in the Southern New England Orogen of NSW, considered to be
Australia’s premier antimony mineral province. Previously announced conventional and auger
soil sampling and rock chip analytical results of up to 39.3% Sb and 1.09ppm Au from Oaky
Creek indicate potential for a large-scale orogenic antimony-gold vein system with a strike
extent of ~3km at surface, which is analogous to Larvotto Resources’ Hillgrove project,
Australia’s largest known antimony deposit.
ASX Announcement
9 July 2026
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
2
Red Mountain Mining Limited (ASX: RMX, US OTCQB: RMXFF, or “the Company”), a Critical
Minerals exploration and development company with an established portfolio in Tier-1 Mining Districts
in the United States and Australia, has completed 2D and 3D modelling of dipole-dipole induced
polarization (DDIP) data collected during a four-line, 6.2 line-km, orientation IP survey at the Oaky
Creek South antimony prospect within the Company’s 100% owned Armidale Antimony-Gold Project
in New South Wales, Australia. The survey was designed to test the subsurface electrical response
across the coherent antimony-arsenic auger soil anomaly at the Oaky Creek South Main Grid, to
extend across the soil anomaly, surface quartz-carbonate-stibnite vein mineralisation and shallow
historical pits and shafts at the Oaky Creek South Workings; and to cross a major fault splay of the
Namoi Fault that is interpreted to be a potential major feeder structure for the orogenic antimony
mineralisation at the Oaky Creek Prospect (Figure 1).
Figure 1: Reprocessed GSNSW RTP TILT magnetics1 over the broader Oaky Creek South area, showing anomalous (>10ppm Sb) auger
antimony soil results, completed IP lines, and the Oaky Creek South Main Grid and Oaky Creek South Workings surface geochemical
anomalies. Auger samples returning <10ppm Sb are not shown to avoid obscuring the magnetics. For full sample coverage refer to Figure
5.
1Matthews, S.J. 2024. New South Wales Statewide magnetic merge, version 3.0 [Digital Dataset]. Geological Survey of New South Wales,
Department of Primary Industries and Regional Development, Maitland.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
3
The survey was completed for Red Mountain collected DDIP data at a spacing of 50m along three
1.6km long, 100m spaced NW-SE oriented lines and one 1.5km long SW-NE oriented line. Gradient
array IP (GAIP) data was also collected along the three NW-SE oriented lines to test the relative
effectiveness of the two techniques, as GAIP data can be collected more quickly and therefore is more
cost-effective, particularly for large survey areas, but is less effective at detecting narrow, steeply-
dipping targets2
, such as those expected for the Oaky Creek vein system. Due to its potential greater
effectiveness, Red Mountain prioritised modelling of the DDIP data from the survey, the results of
which are presented below. Modelling of the GAIP data are still in progress.
Chargeability data show potential strike extensions for Oaky Creek South mineralisation
Modelled 2D chargeability cross sections for the four DDIP lines are shown in Figure 2. The data show
a clear coherent chargeability anomaly associated with anomalous auger soil antimony values,
outcropping quart-carbonate-stibnite veins and shallow historical workings at the Oaky Creek South
Workings (OCSW - Figure 2). The anomaly has a maximum observed chargeability of 7.2 mV/V,
compared to background values that typically range from 2 to 3 mV/V, and is most strongly developed
on Line 10000N, which is the southernmost line through the OCSW, so remains open in that direction.
The 2D modelling indicates that the chargeability anomaly dips steeply to the southeast, while 3D
modelling (Figure 3) suggests that the anomaly is most strongly developed southwest of Line 10000N,
and implies that it extends at least a further 150m beyond it. The anomaly is interpreted to potentially
represent the presence of chargeable sulfide within steeply dipping quartz-carbonate-stibnite veins,
similar to those mapped and sampled at the surface within and adjacent to the historical workings.
The modelling therefore suggests that the veins both persist to depths of greater than 100m, and
potentially much deeper, below surface and that they extend along strike over a total distance of at
least 400m (Figure 3) well beyond the ~120m surface footprint of the outcropping veins and extending
the size of the drill target at OCSW.
2J.D. Corbett, 1992. https://www.tandfonline.com/doi/abs/10.1071/EG992075
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
4
Figure 2: Modelled 2D chargeability sections for the four DDIP lines comprising Red Mountain’s orientation IP survey at Oaky Creek South.
For line locations refer to Figure 1. All DDIP lines intersect the Oaky Creek South Main Grid auger soil anomaly (OCSMG); Lines 10100N and
10000N intersect the Oaky Creek South Workings auger soil anomaly and historical workings (OCSW); and Line 20000E intersects the Namoi
Faul Splay (NFS), where shown. The points where Line 20000E intersects the three NW-SE trending lines and the intersections of those lines
on Line 20000E are also indicated by the black vertical arrows.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
5
Figure 3: 3D perspective view looking northeast (top) and map view (bottom left) of 3D modelled DDIP chargeability, showing the strong
coherent chargeabilty anomaly beneath and extending SSW from the OCSW, which is open to the SSW, and the weaker response beneath
the central portion of the OCSMG.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
6
As can be seen on Figure 2 and Figure 3 the DDIP data also show a weak chargeabilty response
beneath the strong antimony-arsenic auger soil anomaly at the Oaky Creek South Main Grid (OCSMG).
The maximum observed chargeability of this response, which is most strongly developed near surface
on Line 20000E immediately southwest of its intersection with Line 10100N, is 3.91 mV/V. The response
appears to have a near-vertical dip on Line 10100N, but has limited depth extent on the other lines.
It appears shallow and near flat-lying on Line 20000E, as this line is oriented within and parallel to
the strike of the auger soil anomaly at OCSMG.
Resistivity data from Oaky Creek
Modelled resistivity values from the DDIP survey vary between 100 Ω•m and 1200 Ω•m (Figure 4),
which are within the expected range of resistivities for the metasedimentary host rocks at Oaky Creek
South. The values are also within the same range of resistivities measured using GAIP by Larvotto
Resources (ASX: LRV; Market Cap ~$660 million) at the analogous Hillgrove antimony-gold deposit
over the past twelve months. As detailed in multiple ASX announcements3, 4, 5, 6, 7, 8
, Larvotto have been
using GAIP surveys as a tool to identify extensions to known orogenic antimony-gold mineralisation
and as a targeting tool for previously unrecognised parallel mineralised veins. With the benefit of a
robust geological framework developed from a large historical drilling database and an extensive
network of underground workings, they have detected subtle resistivity variations associated with
narrow (~1m) weakly conductive vein-style mineralisation and the broader (up to 20m) resistive silica-
sericite alteration envelopes that typically surround high grade veins.
Red Mountain does not have any subsurface drilling data from Oaky Creek South and consequently
does not have sufficient geological information to confidently interpret the subtle variations in
resistivity shown by our DDIP resistivity data (Figure 4). Resistivity is generally lower close to surface
along all four lines, which is an expected effect of near surface weathering. There is evidence of near-
vertical less resistive (ie: weakly conductive) features that correspond to the chargeability anomalies
at OCSW and OCSMG, particularly on Line 10000N. However, these features are weakly developed
3LRV ASX Announcement 26 March 2025. https://www.larvottoresources.com/wp-content/uploads/2025/03/61257273.pdf
4LRV ASX Announcement 26 May 2025. https://www.larvottoresources.com/wp-content/uploads/2025/05/61265916.pdf
5LRV ASX Announcement 16 September 2025. https://www.larvottoresources.com/wp-content/uploads/2025/09/61284002.pdf
6LRV ASX Announcement 30 September 2025. https://www.larvottoresources.com/wp-content/uploads/2025/09/61286955.pdf
7LRV ASX Announcement 8 January 2026. https://www.larvottoresources.com/wp-content/uploads/2026/01/61306370.pdf
8LRV ASX Announcement 4 February 2026. https://www.larvottoresources.com/wp-content/uploads/2026/01/61306370.pdf
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
7
and do not represent compelling evidence of the presence, or absence of alteration or antimony
mineralisation.
Figure 4: Modelled 2D resistivity sections for the four DDIP lines comprising Red Mountain’s orientation IP survey at Oaky Creek South. For
line locations refer to Figure 1. All DDIP lines intersect the Oaky Creek South Main Grid auger soil anomaly (OCSMG); Lines 10100N and
10000N intersect the Oaky Creek South Workings auger soil anomaly and historical workings (OCSW); and Line 20000E intersects the Namoi
Faul Splay (NFS), where shown. The points where Line 20000E intersects the three NW-SE trending lines and the intersections of those lines
on Line 20000E are also indicated by the black vertical arrows.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
8
Drilling Contractors Secured to Commence RC Drilling Program in two weeks
Red Mountain is pleased to announce that it has engaged Durock to complete the maiden drilling
program at Oaky Creek, with a contracted start date of 20 July 2026. The planned program, which has
been fully approved by the NSW Resources Regulator, will comprise up to 32 reverse circulation (RC)
drillholes to a maximum hole depth of 300m.
The RC drilling program is designed to test four of five compelling orogenic antimony-gold targets
defined from Red Mountain’s comprehensive surface rock chip, conventional soil and auger soil
sampling program, completed over the past 12 months (Figure 5). The program will drill test the
coherent 300m x 30m Oaky Creek South Main Grid antimony-arsenic auger soil anomaly, which has
also returned rock chip results of up to to 39.3% Sb & 1.09ppm Au; the historical workings and
outcropping quartz-carbonate-stibnite veins at the Oaky Creek South Workings and the chargeabilty
anomaly that extends to the SSW; the Oaky Creek North Workings; and the Sb-bearing Creek exposure
to the north of it. Red Mountain’s fifth priority surface geochemical drill target at Oaky Creek, the
Oaky Creek North South Extension, is currently under crop, so cannot be accessed at this time.
The approved drilling approval application does not limit Red Mountain to specific collar locations,
allowing the Company the flexibility to adjust drill locations in response to initial results, for example
to test for depth or strike extensions to early mineralised intercepts. Initial drillholes are planned to
be between 100m and 150m deep, significantly shallower than the maximum requested approved
hole depth of 300m, in order to establish continuity of mineralisation from surface. However the
maximum depth of 300m will allow for testing of further down-dip extensions of mineralisation, if
justified by early results. Orogenic antimony vein systems such as those present at Oaky Creek are
known to have significant depth extent, with Larvotto Resources’ analogous Hillgrove deposit known
to extend over vertical depths of more than 1km9
.
The initial drilling program is expected to be completed before the end of August and the Company
anticipates that assay results for all drillholes will be received during the current Quarter.
9B. Hooper, P. Ashley and P. Shields, 2006. https://smedg.org.au/wp-content/uploads/2015/05/Hoopab.pdf
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
9
Figure 5: (A) Google Earth image showing auger soil sampling completed over the Oaky Creek antimony prospect relative to contoured
conventional soil antimony values and antimony minerallised (>0.5% Sb) rock chip samples. The two insets show the NSW 5m digital
elevation model over the (B) Oaky Creek North and (C) Oaky Creek South areas, showing auger antimony soil results, mapped quartz-
carbonate-stibnite vein traces and priority drill targets.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
10
Oaky Creek represents a significant 3km long orogenic antimony system with multiple
drill ready targets
The Oaky Creek prospect features quartz-carbonate-stibnite veins and breccias hosted within a tightly
folded and faulted sequence of metamorphosed Carboniferous mudstone, siltstone and fine
sandstone. The mineralisation has been targeted by two groups of shallow historical pits and shafts
at Oaky Creek North and Oaky Creek South.
The Company’s initial sampling program at Oaky Creek comprised a 50m x 100m spaced grid soil
sampling program centered on a major splay of the Namoi Fault, accompanied by rock chip sampling.
As initially reported in June 202510
, the soil sampling defines a coherent, ~1.5km long, 100-200m
wide, NNW-trending >2ppm Sb in soil anomaly extending both north and south of the historical
workings at Oaky Creek North and a similarly-oriented ~1km long >2ppm Sb in soil anomaly
extending north from the Oaky Creek South workings.
Sampling campaigns at Oaky Creek1112
, returned multiple rock chip samples13, 14, 15
with values of over
25% Sb and 0.1g.t Au for five different areas, with mineralised and anomalous rock samples showing
a strong spatial correlation to the antimony soil anomaly (Figure 5Error! Reference source not
found.). When considered collectively, the soil and rock chip results indicate a significant orogenic
antimony mineral system with a strike extent of 3km, which is analogous to Larvotto Resources’ (ASX:
LRV; Market Cap. ~AU$660 million) Hillgrove Project, which lies east of Red Mountain’s project area.
Red Mountain’s ~1300 sample infill hand auger soil sampling campaign across the full ~3km strike
extent of the Oaky Creek prospect was completed across the late 2025 and early 2026 to tighten the
Company’s existing 100m x 50m spaced soil grid in order to better constrain individual high priority
drill targets. This detailed systematic work has allowed the company to define five high priority
orogenic antimony targets16
for drill testing at Oaky Creek (Figure 5Error! Reference source not
found.) during the third quarter of 2026.
10RMX ASX Announcement 7 June 2025. https://investorhub.redmountainmining.com.au/announcements/6998482
11RMX ASX Announcement 27 June 2025. https://investorhub.redmountainmining.com.au/announcements/7026204
12RMX ASX Announcement 11 July 2025. https://investorhub.redmountainmining.com.au/announcements/7050680
13RMX ASX Announcement 2 October 2025. https://investorhub.redmountainmining.com.au/announcements/7181513
14RMX ASX Announcement 15 January 2026. https://investorhub.redmountainmining.com.au/announcements/7325282
15RMX ASX Announcement 12 March 2026. https://investorhub.redmountainmining.com.au/announcements/7435807
16RMX ASX Announcement 30 March 2026. https://investorhub.redmountainmining.com.au/announcements/7467812
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
11
Red Mountain Armidale Antimony-Gold Project background
Red Mountain’s 100%-owned Armidale Antimony-Gold Project lies in the Southern New England
Orogen (SNEO) in northeastern New South Wales, approximately west of Australia’s largest known
antimony deposit, Larvotto’s (ASX: LRV) Hillgrove deposit, which is also the 8th
largest antimony
deposit globally. The SNEO is recognised as Australia’s premier Antimony province (Figure 6).
Figure 6: Location of LRV’s Hillgrove Mine and other Known NSW gold and antimony mineral occurrences relative to Red Mountain’s
Armidale Antimony-Gold Project and NSW basement orogenic units. The map clearly demonstrates the prospectivity of the New England
Orogen for antimony and gold. The location the Peel Fault is also shown.
Red Mountain’s Armidale Antimony-Gold Project has an extensive 85km length along the western
side of the Peel Fault. The geology of the project area is dominated by isoclinally folded Carboniferous
metasediments of the Tamworth Belt, which is a forearc basinal package related to west-dipping
subduction of oceanic crust beneath the Lachlan Orogen. Ultramafic mélanges of the Great
Serpentinite Belt, which outcrop along the Peel Fault, are considered to be remnants of this oceanic
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
12
crust. The Peel Fault System has recognised world-class mineral potential, with over 400 known
orogenic gold and base metal mineral occurrences along its over 400km strike extent, but is
underexplored, with less than 200 mostly shallow drillholes over its length, the majority of which are
focused on discrete prospects. Oaky Creek is the company’s highest priority and most advanced
prospect within the project and is one of several known orogenic gold and antimony mineral
occurrences within the tenement (Figure 7).
Figure 7: Geological Survey of NSW total magnetic intensity reduced to pole (TMI RTP) imagery17 and location of gold and antimony
mineral occurrences within and near to EL9732, summarising highlights of RMX’s exploration to date and the location of the Company’s
Oaky Creek and East Hills antimony prospects, Horsley Station gold prospect and Horsley North magnetic target. The mapped location of
the Peel Fault is also shown.
17Matthews, S.J. 2024. New South Wales Statewide magnetic merge, version 3.0 [Digital Dataset]. Geological Survey of New South Wales,
Department of Primary Industries and Regional Development, Maitland.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
13
Authorised for and on behalf of the Board,
Mauro Piccini
Company Secretary
Disclaimer
In relying on the above mentioned ASX announcement and pursuant to ASX Listing Rule 5.23.2, the Company confirms that
it is not aware of any new information or data that materially affects the information included in the above-mentioned
announcement.
Forward–Looking Statements
Some of the statements appearing in this announcement may be in the nature of forward-looking statements. You should
be aware that such statements are only predictions and are subject to inherent risks and uncertainties. Those risks and
uncertainties include factors and risks specific to the industries in which Red Mountain operates and proposes to operate
as well as general economic conditions, prevailing exchange rates and interest rates and conditions in the financial markets,
among other things. Actual events or results may differ materially from the events or results expressed or implied in any
forward- looking statement. No forward-looking statement is a guarantee or representation as to future performance or any
other future matters, which will be influenced by a number of factors and subject to various uncertainties and contingencies,
many of which will be outside Red Mountain’s control.
About Red Mountain Mining
Red Mountain Mining Ltd (ASX: RMX, US CODE: RMXFF) is a Critical Minerals exploration and development company
focussed on accelerating development at its United States and Australia based Projects, located in Tier-1 Mining Districts.
Red Mountain is fast-tracking its Critical Minerals projects in the US and Australia, and the Board and Management is
determined to rapidly define a portfolio of advanced projects to assist the United States and other Western countries with
a reliable, high-quality source of commodity supply, including from the Company’s Armidale Antimony-Gold Project located
in NSW, Australia, which has delivered multiple high-grade antimony rock chip samples to date (up to 39.3% Sb); and its US
Critical Minerals Portfolio. comprising the Pioneer Tungsten Project in Montana, which encompasses the same geology
and exhibits the same skarn-style mineralisation as the 6.8Mt Gentung tungsten resource (owned by NASDAQ: ALM); the
Utah Antimony Project in the highly prospective Antimony Mining District of Utah, adjacent to the Antimony Canyon Project
(owned by ASX: AT4); the Thompson Falls Antimony Project with initial assay results of up to 36.5% Sb at historical mines
located near the NYSE: UAMY Antimony Smelter, and two Idaho Antimony Projects.
Competent Person Statement
The information in this announcement that relates to Exploration Results and other technical information complies with the
2012 Edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves (JORC Code).
It has been compiled and assessed under the supervision of contract geologist Mark Mitchell. Mr Mitchell is a Member of
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
14
the Australasian Institute of Geoscientists and has sufficient experience that is relevant to the style of mineralisation and
type of deposit under consideration and to the activity being undertaken to qualify as a Competent Person as defined in
the 2012 Edition of the JORC Code. Mr Mitchell consents to the inclusion in this announcement of the matters based on
his information in the form and context in which it appears.
JOIN THE RED MOUNTAIN MINING INVESTOR HUB
Visit https://investorhub.redmountainmining.com.au for access to the Investor Hub
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
15
JORC Code, 2012 Edition - Table 1
1.1 Section 1 Sampling Techniques and Data
Criteria JORC Code explanation Commentary
Sampling
techniques
Nature and quality of sampling (e.g. cut
channels, random chips, or specific
specialised industry standard measurement
tools appropriate to the minerals under
investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc).
These examples should not be taken as
limiting the broad meaning of sampling.
Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any measurement
tools or systems used.
Aspects of the determination of
mineralisation that are Material to the
Public Report.
In cases where ‘industry standard’ work has
been done this would be relatively simple
(eg ‘reverse circulation drilling was used to
obtain 1 m samples from which 3 kg was
pulverised to produce a 30 g charge for fire
assay’). In other cases more explanation
may be required, such as where there is
coarse gold that has inherent sampling
problems. Unusual commodities or
mineralisation types (eg submarine nodules)
may warrant disclosure of detailed
information.
No surface sampling or drilling results
are reported.
Drilling
techniques
Drill type (e.g. core, reverse circulation,
open-hole hammer, rotary air blast, auger,
Bangka, sonic, etc) and details (e.g. core
diameter, triple or standard tube, depth of
diamond tails, face-sampling bit or other
type, whether core is oriented and if so, by
what method, etc).
No drilling results are reported.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
16
Criteria JORC Code explanation Commentary
Drill
sample
recovery
Method of recording and assessing core
and chip sample recoveries and results
assessed.
Measures taken to maximise sample
recovery and ensure representative nature
of the samples.
Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse
material.
No drilling results are reported.
Logging Whether core and chip samples have been
geologically and geotechnically logged to a
level of detail to support appropriate
Mineral Resource estimation, mining studies
and metallurgical studies.
Whether logging is qualitative or
quantitative in nature. Core (or costean,
channel, etc) photography.
The total length and percentage of the
relevant intersections logged.
No drilling results are reported.
Sub-
sampling
techniques
and
sample
preparation
If core, whether cut or sawn and whether
quarter, half or all core taken.
If non-core, whether riffled, tube sampled,
rotary split, etc and whether sampled wet
or dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
Quality control procedures adopted for all
sub-sampling stages to maximise
representivity of samples.
Measures taken to ensure that the
sampling is representative of the in situ
material collected, including for instance
results for field duplicate/second-half
sampling.
Whether sample sizes are appropriate to
the grain size of the material being
No surface sampling or drilling results
are reported.
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
17
Criteria JORC Code explanation Commentary
sampled.
Quality of
assay data
and
laboratory
tests
The nature, quality and appropriateness of
the assaying and laboratory procedures
used and whether the technique is
considered partial or total.
For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the
analysis including instrument make and
model, reading times, calibrations factors
applied and their derivation, etc.
Nature of quality control procedures
adopted (e.g. standards, blanks, duplicates,
external laboratory checks) and whether
acceptable levels of accuracy (i.e. lack of
bias) and precision have been established.
No geochemical results are reported
DDIP Survey Specifications
The DDIP survey was conducted by
Fender Geophysics with 50m Rx and 50m
Tx spacings on three, 100m-spaced,
1.6km long NW-SE oriented lines and
one 1.5km long SW-NE oriented line, for
a total of 6.3 line km.
Transmitter and receiver electrode
locations were measured using Garmin
64s handheld GPS units, which have a
quoted accuracy of ±3m.
The receiver electrodes (non-polarising
porous pot electrodes with a copper
sulphate solution) were connected to the
receiver via a multicore receiver cable.
The transmitting electrodes (aluminium
plates) were connected to the transmitter
via single-core transmission wire. Heavy-
duty alligator clips on the plates ensured
a consistent and safe contact.
The GDD Rx32 16-channel IP Receiver
used for the survey measures voltage
with a resolution of 1µV, at an accuracy
of ≤0.15%; and measures chargeability
with a resolution of 1µV/V, at an
accuracy of ≤0.4%.
Field data was acquired by a geophysicist
with the following verification processes
in place:
Manual recording of station location,
current output, primary voltage,
resistivity and chargeability.
Between 2 and 8-fold stacking for
each reading, with visual inspection
of individual decay stacks.
Minimum of 3 readings per station,
RED MOUNTAIN MINING LTD ASX: RMX INVESTORHUB.REDMOUNTAINMINING.COM.AU
18
Criteria JORC Code explanation Commentary
thus verifying repeatability of the
recorded values.
Data and any cultural features were
recorded in the operator’s field
notes for review in conjunction with
later quality control.
• Data was downloaded from the receiver
at the end of each day and uploaded to
the cloud-based SharePoint project
folder. Further QA and processing of the
data were completed off-site by a second
geophysicist. The raw IP data was
assessed in TQIPdb for individual decay
curves for each reading as well as for
overall data quality.
Verification
of
sampling
and
assaying
The verification of significant intersections
by either independent or alternative
company personnel.
The use of twinned holes.
Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
Discuss any adjustment t
Share your feedback
Discover